DS75160A DS75161A DS75162A IEEE-488 GPIB Transceivers
February 1996
DS75160A DS75161A DS75162A IEEE-488 GPIB Transceiv...
DS75160A DS75161A DS75162A IEEE-488 GPIB Transceivers
February 1996
DS75160A DS75161A DS75162A IEEE-488 GPIB Transceivers
General Description
This family of high-speed-
Schottky 8-channel bi-directional transceivers is designed to interface TTL MOS logic to the IEEE Standard 488-1978 General Purpose Interface Bus (GPIB)
PNP inputs are used at all driver inputs for minimum loading and hysteresis is provided at all receiver inputs for added noise margin The IEEE-488 required bus termination is provided internally with an active turn-off feature which disconnects the termination from the bus when VCC is removed
The General Purpose Interface Bus is comprised of 16 signal lines 8 for data and 8 for interface management The data lines are always implemented with DS75160A and the management lines are either implemented with DS75161A in a single-controller system or with DS75162A in a multicontroller system
Features
Y 8-channel bi-directional non-inverting transceivers Y Bi-directional control implemented with TRI-STATE
output design Y Meets IEEE Standard 488-1978 Y High-speed
Schottky design Y Low power consumption Y High impedance
PNP inputs (drivers) Y 500 mV (typ) input hysteresis (receivers) Y On-chip bus terminators Y No bus loading when VCC is removed Y Pin selectable open collector mode on DS75160A driv-
er outputs Y Accommodates multi-controller systems
Connection Diagrams
Dual-In-Line Package
Dual-In-Line Package
Top View
TL F 5804 – 1
Order Number DS75160AN or DS75...