VFM Step-Up DC/DC Converter
LD7280
05/08/2006
VFM Step-Up DC/DC Converter
Rev: 00a
General Description
The LD7280 is a VFM step-up DC/DC converte...
Description
LD7280
05/08/2006
VFM Step-Up DC/DC Converter
Rev: 00a
General Description
The LD7280 is a VFM step-up DC/DC converter with ultra low supply current. The CMOS design results in less power consumption and high capability for battery-powered instruments.
The LD7280 is a high efficiency step–up DC/DC converter and takes only three external components to achieve the low ripple.
As well, using chip enable function will make it possible to supply current on standby minimized.
Features
Minimum external component counts Ultra low input current in switch off (TYP 5µA) ±2% High accuracy of output voltage Low ripple and low noise Low start-up voltage, 0.85V at no load. 80% efficiency with low cost inductor
Applications
Power source for battery -powered equipment Power source for DSC, PDA, Camcorders, VCRs,
Pagers, and Hand-held communication equipment
Typical Application
47µH VIN
L
L range: 10µH~120µH
D1 5817SL LX VOUT NC CE GND
LD7280 Fig. 1
VOUT
COUT 22µF
Leadtrend Technology Corporation LD7280-DS-00a May 2007
1
LD7280
Pin Configuration
SOT-89 (TOP VIEW)
7280PJ YWXX
12
3
GND VOUT LX
Y : Year code (D: 2004, E: 2005…..) W : Week code XX : Output Voltage
SOT-25 (TOP VIEW) LX GND
54 Y WP 80 XX
123
Y CE VOUT NC The PB-free package is identified in embossed font
Ordering Information
Part number
Package
LD7280 PL-XX
SOT-25
LD7280 PJ-XX
SOT-89
The LD7280 is ROHS compliant.
XX: Output voltage: 33: 3.3V, 50: 5.0V
Top Mark YWP80/XX 7280PJ
Shipping 3000...
Similar Datasheet