VFM Step-Up DC/DC Converter
LD7282A
5/10/2006
VFM STEP-UP DC/DC CONVERTER
REV: 01
General Description
The LD7282A is a VFM step-up DC/DC converte...
Description
LD7282A
5/10/2006
VFM STEP-UP DC/DC CONVERTER
REV: 01
General Description
The LD7282A is a VFM step-up DC/DC converter with ultra low supply current. The CMOS design results in less power consumption and high capability for battery-powered instruments.
With a built-in switching MOSFET, the LD7280 takes only three external components (using a coil, diode & capacitor connected externally) to achieve the low ripple & high efficiency.
As well, using chip enable function will make it possible to supply current on standby minimized. This converter also features a very low switch off, bias current of 5.0µA typical.
Features
Minimum external component counts Ultra low input current in switch off (Typ. 5µA) ±2% High accuracy of output voltage Low ripple and low noise Low start-up voltage, 0.75V at no load. 85% efficiency with low cost inductor
Applications
Power source for battery -powered equipment Power source for DSC, PDA, Camcorders, VCRs,
Pagers, and Hand-held communication equipment
Typical Application
47µH
VIN L
D1 5817SL
LX VOUT NC CE GND
VOUT
COUT 22µF
L range: 10µH~120µH
LD7282A Fig. 1
Leadtrend Technology Corporation LD7282A-DS-01 May, 2006
1
LD7282A
Pin Configuration
SOT-89 (TOP VIEW)
YWP
82A XX
12
3
GND VOUT
LX
SOT-25 (TOP VIEW) LX GND
54 Y WP 82A XX
123
CE VOUT NC
LX GND
Y : Year code (D: 2004, E: 2005…..) W : Week code P : LD72..
(Product family code) XX : Output Voltage
54 Y WP 82A XX
123
Y CE VOUT NC The PB-free package is identi...
Similar Datasheet