DatasheetsPDF.com

NAL40-7608 Dataheets PDF



Part Number NAL40-7608
Manufacturers Artesyn
Logo Artesyn
Description AC/DC power supplies
Datasheet NAL40-7608 DatasheetNAL40-7608 Datasheet (PDF)

[ 2 YEAR WARRANTY ] NAL40 and NAN40 SERIES Single, dual and triple output • 5.0 x 3.0 x 1.2 inch package (1U applications) • Ideal for high volume designs • Industry standard package • Overvoltage and short circuit protection • 40W with free air convection • NAN40: EN55022, EN55011 conducted emissions level B • NAL40: EN55022, EN55011 conducted emissions level A The NAL40 and NAN40 series are 40W universal input AC/DC power supplies on a 5 x 3 inch card with a maximum component height of 1.2 in.

  NAL40-7608   NAL40-7608


Document
[ 2 YEAR WARRANTY ] NAL40 and NAN40 SERIES Single, dual and triple output • 5.0 x 3.0 x 1.2 inch package (1U applications) • Ideal for high volume designs • Industry standard package • Overvoltage and short circuit protection • 40W with free air convection • NAN40: EN55022, EN55011 conducted emissions level B • NAL40: EN55022, EN55011 conducted emissions level A The NAL40 and NAN40 series are 40W universal input AC/DC power supplies on a 5 x 3 inch card with a maximum component height of 1.2 inch for use in 1U applications. These series are available with a wide range of models in the industry standard 5 x 3 inch footprint at low cost making the series ideal for new and existing high volume communication and industrial applications. The difference between the NAL40 and NAN40 is their conducted emissions performance - the NAN40 meets EN55022 level B while the NAL40 meets level A. The NAL40 and NAN40 provide 40W of output power with free air convection cooling with a peak output of 50W for a maximum duration of 60 seconds. The NAL40 and NAN40 series are designed for use in high volume low power data networking, computer and telecom applications such as hubs, routers, POS terminals, cable modems and PABX's. This list is not exclusive as the generic feature set of both series with industry standard output configurations provide a solution for most high volume applications including many industrial applications. SPECIFICATION All specifications are typical at nominal input, full load at 25°C unless otherwise stated OUTPUT SPECIFICATIONS Line regulation Main output Auxiliary outputs ±0.5% ±1.0% Total regulation Main output Auxiliary outputs ±3.0% ±5.0% Overshoot/undershoot At turn-on <10% Transient response +5.1V ±150mV max. dev., (1.5A to 3A step) 500µs recovery Temperature coefficient ±0.02%/°C Overvoltage protection +5.1V output 6.25V ±0.75Vout Output power limit Primary power limited 50W Pout, min. 110W Pin, max. Short circuit protection Multiple output Single 12V, 15V, 24V and 48V 30 seconds Continuous automatic recovery Output voltage trim NAN40-7662 only ±5% (See Note 10) INPUT SPECIFICATIONS Input voltage range Universal input 90 to 264VAC 120 to 370VDC Input frequency range 47Hz to 440Hz Input surge current 110VAC, cold start 230VAC, cold start 15A 32A Safety ground leakage current 110VAC, 60Hz 230VAC, 50Hz 0.2mA 0.4mA International Safety Standard Approvals VDE0805/EN60950/IEC950/IEC1010 File No. 10401-3336-1076 Licence No. 70567, 1076 and 90354 UL1950 File No. E136005 CSA C22.2 No. 950 File No. LR41062C Certificate No. PS/605108 PAGE 22 EMC CHARACTERISTICS Conducted emissions Conducted emissions Radiated emissions ESD air ESD contact Surge Fast transients Radiated immunity Conducted immunity NAL: EN55022, FCC part 15 level A NAN: EN55022, FCC part 15 level B EN55022, FCC part 15 level A EN61000-4-2, level 3 Perf. criteria 2 EN61000-4-2, level 4 Perf. criteria 2 EN61000-4-5, level 3 Perf. criteria 2 EN61000-4-4, level 3 Perf. criteria 2 EN61000-4-3, level 3 Perf. criteria 2 EN61000-4-6, level 3 Perf. criteria 2 GENERAL SPECIFICATIONS Hold-up time 110VAC 230VAC 10ms @ 40W 60ms @ 40W Efficiency 68% min. @ 40W Isolation voltage Input/output Input/chassis 3000VAC 1500VAC Switching frequency Variable Approvals and standards (See Note 9) VDE0805, EN60950, IEC950 BABT, IEC1010, UL1950 CSA C22.2 No. 950 Weight 200g (7.06oz) MTBF MIL-HDBK-217F 150,000 Hours ENVIRONMENTAL SPECIFICATIONS Thermal performance Operating Non-operating 0°C to +70°C -40°C to +85°C 0°C to 50°C ambient, convection cooled 40W 50°C to 70°C, Derate linearly ambient conv. cooled to half load Peak (0°C to 50°C) max. 60s 50W Relative humidity Non-condensing 5% to 95% RH Altitude Operating Non operating 10,000 feet max. 30,000 feet max. Vibration Three orthogonal axes, 2.4G rms random vibration, 10 5Hz to 500Hz minute test for each axis Data Sheet © Artesyn Technologies® 2001 LOW TO MEDIUM POWER AC/DC POWER SUPPLIES | 40W AC/DC 40 Watt AC/DC universal input switch mode power supplies OUTPUT VOLTAGE MAX (1) OUTPUT CURRENT PEAK (2) FAN (3) TOTAL RIPPLE (4) REG. (5) MODEL NUMBER (B) + 5.1V (IA) +12V (IB) –12V (IC) +5.1V 3A 2A 0.35A 3A 7A 3A 1A 7A 4A 2A 0.5A 4A 50mV 120mV 120mV 45mV ±3.0% ±5.0% ±5.0% ±3.0% NAL40-7608 (5) NAN40-7608 (5) NAN40-7662 (10) NAL40-7628 (8) NAN40-7628 (8) 1 +12V 0.35A 3A 0.5A 110mV ±5.0% –12V 0.35A 1A 0.5A 110mV ±5.0% +5.1V (IA) +12V (IB) –5V (IC) +5.1V (IA) +15V (IB) –15V (IC) +5.1V (IA) +12V (IB) 5V 3A 2A 0.35A 3A 1.5A 0.35A 3A 2A 6A 7A 3A 1.0A 7A 3A 1A 7A 3A 10A 4A 2A 0.5A 4A 1.5A 0.5A 4A 2A 8A 50mV 120mV 50mV 50mV 160mV 150mV 50mV 120mV 50mV ±3.0% NAL40-7607 (5) ±5.0% ±5.0% ±3.0% NAL40-7610 (5) +13% –0% ±5.0% ±3.0% NAL40-7629 (5) ±5.0% ±3.0% NAL40-7605 NAN40-7607 (5) NAN40-7610 (5) NAN40-7629 (5) NAN40-7605 12V 3.3A 5A 4A 120mV ±3.0% NAL40-7612 NAN40-7612 15V 2.6A 4A 3.3A 150mV .


ACT6702 NAL40-7608 NAL40-7628


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)