High Speed USB 2.0 (480Mbps) DPDT Analog Switch
SGM7222 High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DESCRIPTION
FEATURES
The SGM7222 is a high-speed, low...
Description
SGM7222 High Speed USB 2.0 (480Mbps) DPDT Analog Switch
GENERAL DESCRIPTION
FEATURES
The SGM7222 is a high-speed, low-power double-pole/ double-throw (DPDT) analog switch that operates from a single 1.8V to 4.3V power supply.
SGM7222 is designed for the switching of high-speed USB 2.0 signals in handset and consumer applications, such as cell phones, digital cameras, and notebooks with hubs or controllers with limited USB I/Os.
The SGM7222 has low bit-to-bit skew and high channel-to-channel noise isolation, and is compatible with various standards, such as high-speed USB 2.0 (480 Mbps). Each switch is bidirectional and offers little or no attenuation of the high-speed signals at the outputs. Its bandwidth is wide enough to pass high-speed USB 2.0 differential signals (480 Mb/s) with good signal integrity.
The SGM7222 contains special circuitry on the D+/Dpins which allows the device to withstand a VBUS short to D+ or D- when the USB devices are either powered off or powered on.
SGM7222 is available in Green TQFN-1.8×1.4-10L, MSOP-10 and UTQFN-1.8×1.4-10L packages. It operates over an ambient temperature range of -40℃ to +85℃.
APPLICATIONS
RON is Typically 4.5Ω at 3.0V Low Bit-to-Bit Skew: 50ps (TYP) Voltage Operation: 1.8V to 4.3V Fast Switching Times:
tON 10ns tOFF 22ns Low Crosstalk: -41dB at 250MHz Power-Off Protection when V+ = 0V, D+/D- Pins can Tolerate up to 5.25V High Off-Isolation: -35dB at 250MHz Rail-to-Rail Input and Output Operation Break-Be...
Similar Datasheet