DatasheetsPDF.com

S25FS256SAGBHI303 Dataheets PDF



Part Number S25FS256SAGBHI303
Manufacturers SPANSION
Logo SPANSION
Description MirrorBit Flash Non-Volatile Memory
Datasheet S25FS256SAGBHI303 DatasheetS25FS256SAGBHI303 Datasheet (PDF)

S25FS-S Family MirrorBit® Flash Non-Volatile Memory 1.8-Volt Single Supply with CMOS I/O Serial Peripheral Interface with Multi-I/O S25FS128S 128 Mbit (16 Mbyte) S25FS256S 256 Mbit (32 Mbyte) Data Sheet (Preliminary) S25FS-S Family Cover Sheet Notice to Readers: This document states the current technical specifications regarding the Spansion product(s) described herein. Each product described herein may be designated as Advance Information, Preliminary, or Full Production. See Notice On Data S.

  S25FS256SAGBHI303   S25FS256SAGBHI303


Document
S25FS-S Family MirrorBit® Flash Non-Volatile Memory 1.8-Volt Single Supply with CMOS I/O Serial Peripheral Interface with Multi-I/O S25FS128S 128 Mbit (16 Mbyte) S25FS256S 256 Mbit (32 Mbyte) Data Sheet (Preliminary) S25FS-S Family Cover Sheet Notice to Readers: This document states the current technical specifications regarding the Spansion product(s) described herein. Each product described herein may be designated as Advance Information, Preliminary, or Full Production. See Notice On Data Sheet Designations for definitions. Publication Number S25FS-S_00 Revision 06 Issue Date November 6, 2014 Data Sheet (Preliminary) Notice On Data Sheet Designations Spansion Inc. issues data sheets with Advance Information or Preliminary designations to advise readers of product information or intended specifications throughout the product life cycle, including development, qualification, initial production, and full production. In all cases, however, readers are encouraged to verify that they have the latest information before finalizing their design. The following descriptions of Spansion data sheet designations are presented here to highlight their presence and definitions. Advance Information The Advance Information designation indicates that Spansion Inc. is developing one or more specific products, but has not committed any design to production. Information presented in a document with this designation is likely to change, and in some cases, development on the product may discontinue. Spansion Inc. therefore places the following conditions upon Advance Information content: “This document contains information on one or more products under development at Spansion Inc. The information is intended to help you evaluate this product. Do not design in this product without contacting the factory. Spansion Inc. reserves the right to change or discontinue work on this proposed product without notice.” Preliminary The Preliminary designation indicates that the product development has progressed such that a commitment to production has taken place. This designation covers several aspects of the product life cycle, including product qualification, initial production, and the subsequent phases in the manufacturing process that occur before full production is achieved. Changes to the technical specifications presented in a Preliminary document should be expected while keeping these aspects of production under consideration. Spansion places the following conditions upon Preliminary content: “This document states the current technical specifications regarding the Spansion product(s) described herein. The Preliminary status of this document indicates that product qualification has been completed, and that initial production has begun. Due to the phases of the manufacturing process that require maintaining efficiency and quality, this document may be revised by subsequent versions or modifications due to changes in technical specifications.” Combination Some data sheets contain a combination of products with different designations (Advance Information, Preliminary, or Full Production). This type of document distinguishes these products and their designations wherever necessary, typically on the first page, the ordering information page, and pages with the DC Characteristics table and the AC Erase and Program table (in the table notes). The disclaimer on the first page refers the reader to the notice on this page. Full Production (No Designation on Document) When a product has been in production for a period of time such that no changes or only nominal changes are expected, the Preliminary designation is removed from the data sheet. Nominal changes may include those affecting the number of ordering part numbers available, such as the addition or deletion of a speed option, temperature range, package type, or VIO range. Changes may also include those needed to clarify a description or to correct a typographical error or incorrect specification. Spansion Inc. applies the following conditions to documents in this category: “This document states the current technical specifications regarding the Spansion product(s) described herein. Spansion Inc. deems the products to have been in sufficient production volume such that subsequent versions of this document are not expected to change. However, typographical or specification corrections, or modifications to the valid combinations offered may occur.” Questions regarding these document designations may be directed to your local sales office. 2 S25FS-S Family S25FS-S_00_06 November 6, 2014 S25FS-S Family MirrorBit® Flash Non-Volatile Memory 1.8-Volt Single Supply with CMOS I/O Serial Peripheral Interface with Multi-I/O S25FS128S 128 Mbit (16 Mbyte) S25FS256S 256 Mbit (32 Mbyte) Data Sheet (Preliminary) Features  Density – 128 Mbits (16 Mbytes) – 256 Mbits (32 Mbytes)  Serial Peripheral Interface (SPI) – SPI Clock polarity and phase modes 0 and 3 – Double Data Rate (DDR) option – E.


S25FS128SAGMFI103 S25FS256SAGBHI303 S25FS256SAGMFI003


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)