DatasheetsPDF.com

MTFDDAK960MAV Dataheets PDF



Part Number MTFDDAK960MAV
Manufacturers Micron
Logo Micron
Description M500 2.5-Inch SATA NAND Flash SSD
Datasheet MTFDDAK960MAV DatasheetMTFDDAK960MAV Datasheet (PDF)

M500 2.5-Inch NAND Flash SSD Features M500 2.5-Inch SATA NAND Flash SSD MTFDDAK120MAV, MTFDDAK240MAV, MTFDDAK480MAV, MTFDDAK960MAV Features • Micron® 20nm MLC NAND Flash • RoHS-compliant package • SATA 6 Gb/s interface • TCG/Opal 2.0-compliant self-encrypting drive (SED) • Hardware-based AES-256 encryption engine • ATA modes supported – PIO mode 3, 4 – Multiword DMA mode 0, 1, 2 – Ultra DMA mode 0, 1, 2, 3, 4, 5 • Industry-standard, 512-byte sector size support • Hot-plug/hot-remove capable • P.

  MTFDDAK960MAV   MTFDDAK960MAV


Document
M500 2.5-Inch NAND Flash SSD Features M500 2.5-Inch SATA NAND Flash SSD MTFDDAK120MAV, MTFDDAK240MAV, MTFDDAK480MAV, MTFDDAK960MAV Features • Micron® 20nm MLC NAND Flash • RoHS-compliant package • SATA 6 Gb/s interface • TCG/Opal 2.0-compliant self-encrypting drive (SED) • Hardware-based AES-256 encryption engine • ATA modes supported – PIO mode 3, 4 – Multiword DMA mode 0, 1, 2 – Ultra DMA mode 0, 1, 2, 3, 4, 5 • Industry-standard, 512-byte sector size support • Hot-plug/hot-remove capable • Power loss protection for data-at-rest • Device Sleep (DEVSLP), extreme low-power mode • Native command queuing support with 32-command slot support • ATA-8 ACS2 command set compliant • ATA security feature command set and password login support • Secure erase (data page) command set: fast and secure erase • Sanitize device feature set support • Self-monitoring, analysis, and reporting technology (SMART) command set • Windows 8 drive telemetry • Adaptive thermal monitoring • Power loss protection for data-at-rest • Performance1, 2 – PCMark® Vantage (HDD test suite score): Up to 80,000 – Sequential 128KB READ: Up to 500 MB/s – Sequential 128KB WRITE: Up to 400 MB/s – Random 4KB READ: Up to 80,000 IOPS – Random 4KB WRITE: Up to 80,000 IOPS – READ/WRITE latency: 5ms/25ms (MAX) • Reliability – MTTF: 1.2 million device hours3 – Static and dynamic wear leveling – Uncorrectable bit error rate (UBER): <1 sector per 1015 bits read • Low power consumption – 150mW TYP4 • Endurance: Total bytes written (TBW) – Up to 500TB5 • Capacity6 (unformatted): 120GB, 240GB, 480GB, 960GB • Mechanical – SATA connector: 5V ±10% – 2.5-inch drive: 100.45mm x 69.85mm x 7.0mm – Weight: 70g (MAX) • Secure firmware update with digitally signed firmware image • Operating temperature – Commercial (0°C to +70°C)7 Notes: 1. Typical I/O performance numbers as measured fresh-out-of-the-box (FOB) using Iometer with a queue depth of 32 and write cache enabled. 2. 4KB transfers used for READ/WRITE latency values. 3. The product achieves a mean time to failure (MTTF) based on population statistics not relevant to individual units. 4. Active average power measured during execution of MobileMark® with DIPM (deviceinitiated power management) enabled. 5. Endurance may depend highly on the nature of the data stream from the host computer. See Endurance section for more details. 6. 1GB = 1 billion bytes; formatted capacity is less. 7. Drive onboard temperature sensor. Warranty: Contact your Micron sales representative for further information regarding the product, including product warranties. PDF: 09005aef84fed121 m500_2_5_ssd.pdf - Rev. G 8/14 EN 1 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2013 Micron Technology, Inc. All rights reserved. Products and specifications discussed herein are subject to change by Micron without notice. M500 2.5-Inch NAND Flash SSD Features Part Numbering Information Micron’s M500 SSD is available in different configurations and densities. The chart below is a comprehensive list of options for the M500 series devices; not all options listed can be combined to define an offered product. Visit www.micron.com for a list of valid part numbers. Figure 1: Part Number Chart MT FD D AV 120 M AZ - 1 AE 1 2 AB HA ES Micron Technology Product Family FD = Flash drive Drive Interface D = SATA 6.0 Gb/s Drive Form Factor AK = 2.5-inch (7mm) AT = mSATA AV = M.2 (80mm x 22mm 3.5mm) Drive Density 064 = 64GB 120 = 120GB 128 = 128GB 240 = 240GB 256 = 256GB 480 = 480GB 512 = 512GB 960 = 960GB 1T0 = 1024GB NAND Flash Type M = MLC Product Family AV = M500 AY = M550 AZ = M510 Production Status Blank = Production ES = Engineering sample MS = Mechanical sample Customer Designator YY = Standard HA = HP (Client) Feature Set AA = Contact factory AB = Standard AC = Contact factory ZZ = Blank Z = Blank Extended Feature Set 1 = Contact factory 2 = SED (self-encrypting drive) Sector Size 1 = 512 byte NAND Flash Component AE = 128Gb, MLC, x8, 3.3V (20nm) AH = 64Gb, MLC, x8, 3.3V (20nm) BOM Revision For example: 1 = 1st generation 2 = 2nd generation PDF: 09005aef84fed121 m500_2_5_ssd.pdf - Rev. G 8/14 EN 2 Micron Technology, Inc. reserves the right to change products or specifications without notice. © 2013 Micron Technology, Inc. All rights reserved. M500 2.5-Inch NAND Flash SSD General Description General Description Micron’s solid state drive (SSD) uses a single-chip controller with a SATA interface on the system side and 8-channels of Micron NAND Flash internally. Packaged in an HDD replacement enclosure, the SSD integrates easily in existing storage infrastructures. The SSD is designed to use the SATA interface efficiently during both READs and WRITEs while delivering bandwidth-focused performance. SSD technology enables enhanced boot times, faster application load times, reduced power consumption, and extended reliability. The self-encypting drive (SED) features a FIPS-compliant, AES-256 encrypt.


MTFDDAK480MAV MTFDDAK960MAV M25PX16


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)