REACTION SOCKET EXTENSION TORQUE SENSORS
TORQUE CELLS
LXT 954 - SERIES REACTION SOCKET EXTENSION TORQUE SENSORS
T hese torque sensors are designed to insert be...
Description
TORQUE CELLS
LXT 954 - SERIES REACTION SOCKET EXTENSION TORQUE SENSORS
T hese torque sensors are designed to insert between a squaredrive torque producing device and the work fixture it is attached to. This allows direct static and limited rotation torque measurements while the tool or device is placed under its typical load. A valuable torque measuring solution for testing drive socket systems, calibrating hand and click wrenches and checking applied torque values. Available in ten different torque capacities ranging from 25 in-lb to 7,000 ft-lb, all use a full, four-arm Wheatstone bridge circuit and have elastomer coating to protect the measurement element from mechanical damage. A six-foot 4-conductor shielded cable (terminated in a pigtail) allows the sensors to interface with a variety of test instruments by means of using different connector plugs (not supplied).
INSERTS WITHIN YOUR SQUARE-DRIVE SYSTEM
CONVENIENTLY TESTS TORQUE IN STATIC AND LOADED STATES
VERSATILE FOR MANY TESTING APPLICATIONS AVAILABLE IN TEN DIFFERENT CAPACITY
RANGES SQUARE-DRIVE SIZES FROM 1/4” TO 1-1/2”
LXT 954
S P E C I F I C AT I O N S
CAPACITY:
25 in-lb to 7,000 ft/lb
depending on model
OVERLOAD CAPACITY:
150% of full scale
OUTPUT AT FULL SCALE: 1.00 to 3.00 mV/V
depending on model
NONLINEARITY:
0.10% of full scale
HYSTERESIS:
0.10% of full scale
ZERO BALANCE:
1.00% of full scale
USEABLE TEMPERATURE: -65 to 250˚ F
BRIDGE RESISTANCE:
1,000 ohm
MAX EXCITATION VOLTAGE...
Similar Datasheet