EN25Q128

EN25Q128 EN25Q128 128 Megabit Serial Flash Memory with 4Kbyte Uniform Sector FEATURES Single power supply operation - Full voltage range: 2.7-3.6 volt Serial Interface Architecture - SPI Compatible: Mode 0 and Mode 3 128 M-bit Serial Flash - 128 M-bit/16,384 K-byte/65,536 pages - 256 bytes per programmable page Standard, Dual or Quad SPI - Standard SPI: CLK, CS#, DI, DO, WP# - Dual SPI: CLK, CS#, DQ0, DQ1, WP# - Quad SPI: CLK, CS#, DQ0, DQ1, DQ2, DQ3 High performance - 104MHz clock rate for Standard SPI - 80MHz clock rate for two data bits - 80MHz clock rate for four data bits Low power consumption - 12 mA typical active current - 1 μA typical power down current Uniform Sector Architecture: - 4096 sectors of 4-Kbyte - 256 blocks of 64-Kbyte - Any sector or block can be erased individually Software and Hardware Write Protection: - Write Protect all or portion of memory via software - Enable/Disable protection with WP# pin High performance program/erase speed - Page program time: 0.8ms typical - Sector erase time: 50ms typical - Block erase time 200ms typical - Chip erase time: 45 seconds typical Lockable 512 byte OTP security sector Minimum 100K endurance cycle Package Options - 8 contact VDFN (5x6mm) - 8 contact VDFN (6x8mm) - 16 pins SOP 300mil body width - 24 balls BGA (6x8mm) - All Pb-free packages are RoHS compliant Industrial temperature Range GENERAL DESCRIPTION The EN25Q128 is a 128 Megabit (16,384K-byte) Serial Flash memory, with advanced ...