TOSHIBA Photocoupler IRED & Photo IC
6N135, 6N136
Digital Logic Isolation Line Receiver Power Supply Control Switching P...
TOSHIBA Photocoupler IRED & Photo IC
6N135, 6N136
Digital Logic Isolation Line Receiver Power Supply Control Switching Power Supply
Transistor Inverter
6N135,6N136
Unit: mm
The TOSHIBA 6N135 and 6N136 consists of an infrared emitting diode and a one chip photo diode−
transistor. Each unit is 8−lead DIP package.
Isolation voltage: 2500 Vrms (min) High speed: tpHL, tpLH = 0.5 μs (typ.) (RL = 1.9kΩ) TTL compatible If base pin is open, output signal will be noisy by environmental
condition. For this base, TLP550 is suitable UL-recognized: UL 1577, File No.E67349 CQC-approved(6N136): GB4943.1,GB8898 Japan and Factory
TOSHIBA
11−10C4S
Weight: 0.54 g (typ.)
Pin Configurations
18 27 36 45
1 : N.C. 2 : ANODE 3 : CATHODE 4 : N.C. 5 : EMITTER 6 : COLLECTOR 7 : BASE, ANODE 8 : CATHODE
IF
VF 2 3
ICC 8 VCC
IB 7 VB
IO
6 VO
5 GND
© 2019 Toshiba Electronic Devices & Storage Corporation
1
Start of commercial production
1982-10
2019-06-10
Absolute Maximum Ratings (Ta = 25°C)
6N135,6N136
Characteristics
Symbol
Rating
Unit
Forward current
(Note 1)
Pulse forward current
(Note 2)
LED
Total pulse forward current
(Note 3)
Reverse voltage
Diode power dissipation
(Note 4)
Output current
Peak output current
Detector
Emitter−base reverse voltage (pin 5−7)
Supply voltage
Output voltage
Base current (pin 7)
Output power dissipation
(Note 5)
Operating temperature range
Storage temperature range
Lead solder temperature (10s)
(Note 6)
Isolation voltage
(...