DatasheetsPDF.com

HCPL-0700 Dataheets PDF



Part Number HCPL-0700
Manufacturers Avago
Logo Avago
Description High Gain Optocouplers
Datasheet HCPL-0700 DatasheetHCPL-0700 Datasheet (PDF)

HCPL-0700, HCPL-0701, HCNW138, HCNW139, 6N139, 6N138, Low Input Current, High Gain Optocouplers Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product Description These high gain series couplers use a Light Emitting Diode and an integrated high gain photodetec­tor to provide extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in TTL compatible saturation vol.

  HCPL-0700   HCPL-0700



Document
HCPL-0700, HCPL-0701, HCNW138, HCNW139, 6N139, 6N138, Low Input Current, High Gain Optocouplers Data Sheet Lead (Pb) Free RoHS 6 fully compliant RoHS 6 fully compliant options available; -xxxE denotes a lead-free product Description These high gain series couplers use a Light Emitting Diode and an integrated high gain photodetec­tor to provide extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in TTL compatible saturation voltages and high speed operation. Where desired the VCC and VO terminals may be tied together to achieve conven­tional photodarlington operation. A base access terminal allows a gain bandwidth adjustment to be made. The 6N139, HCPL-0701, and HCNW139 are for use in CMOS, LSTTL or other low power appli­ca­tions. A 400% minimum current transfer ratio is guaranteed over 0 to 70°C operating range for only 0.5 mA of LED current. The 6N138, HCPL-0700, and HCNW138 are designed for use mainly in TTL applications. Current Transfer Ratio (CTR) is 300% minimum over 0 to 70°C for an LED current of 1.6 mA (1 TTL Unit load ). A 300% minimum CTR enables operation with 1 TTL Load using a 2.2 kΩ pull-up resistor. Functional Diagram NC 1 ANODE 2 CATHODE 3 NC 4 8 VCC 7 VB 6 VO 5 GND TRUTH TABLE LED VO ON LOW OFF HIGH Features • High current transfer ratio – 2000% typical (4500 % typical for HCNW139/138) • Low input current requirements – 0.5 mA • TTL compatible output – 0.1 V VOL typical • Performance guaranteed over temperature 0°C to 70°C • Base access allows gain bandwidth adjustment • High output current – 60 mA • Safetyapproval - ULrecognized–3750Vrmsfor1 minuteand5000V rms* for 1 minute per UL 1577 - CSA approved - IEC/EN/DIN EN 60747-5-5 approved with VIORM = 1414 Vpeak for HCNW139 and HCNW138 • Available in 8-Pin DIP or SOIC-8 footprint or widebody package • MIL-PRF-38534 hermetic version available (HCPL-5700/1) Applications • Ground isolate most logic families – TTL/TTL, CMOS/ TTL, CMOS/CMOS, LSTTL/TTL, CMOS/LSTTL • Low input current line receiver • High voltage insulation (HCNW139/138) • EIA RS-232C line receiver • Telephone ring detector • 117 V ac line voltage status indicator – low input power dissipation • Low power systems – ground isolation * 5000 V rms/1 minute rating is for HCNW139/138 and Option 020 (6N139/138) products only. A 0.1 µF bypass capacitor connected between pins 8 and 5 is recommended. CAUTION: It is advised that normal static precautions be taken in handling and assembly of this component to prevent damage and/or degradation which may be induced by ESD. The components featured in this datasheet are not to be used in military or aerospace applications or environments. Selection for lower input current down to 250 µA is available upon request. The HCPL-0701 and HCPL-0700 are surface mount devices packaged in an industry standard SOIC-8 footprint. The SOIC-8 does not require “through holes” in a PCB. This package occupies approximately one-third the footprint area of the standard dual-in-line package. The lead profile is designed to be compatible with standard surface mount processes. The HCNW139 and HCNW138 are packaged in a widebody encapsulation that provides creepa­ ge and clearance dimensions suitable for safety approval by regulatory agencies worldwide. Selection Guide 8-Pin DIP (300 Mil) Single Channel Package Dual Channel Package HCPL- 6N139 6N138 HCPL-4701[1] 2731[1] 2730[1] 4731[1] Small Outline SO-8 Single Channel Package Dual Channel Package HCPL- HCPL- 0701 0731 0700 0730 070A[1] 073A[1] Note: 1. Technical data are on separate Avago publications. Widebody (400 mil) Package Single Channel Package HCNW139 HCNW138 Minimum Input ON Current (IF) 0.5 mA 1.6 mA 40 µA 0.5 mA Minimum CTR 400% 300% 800% 300% Absolute Maximum VCC 18 V 7V 18 V 20 V Hermetic Single and Dual Channel Packages HCPL- 5701[1] 5700[1] 5731[1] 5730[1] Schematic 2 ANODE + VF CATHODE – 3 IF SHIELD V CC 8 ICC IB 7 VB IO 6 VO 5 GND 2 Ordering Information 6N138, 6N139, HCPL-0700 and HCPL-0701 are UL Recognized with 3750 Vrms for 1 minute per UL1577 and are approved under CSA Component Acceptance Notice #5, File CA 88324. Part Number Option RoHS non RoHS Compliant Compliant Package Surface Gull Mount Wing Tape & Reel UL 5000 Vrms/ 1 Minute IEC/EN/DIN rating EN 60747-5-5 Quantity 6N138 6N139 -000E -300E no option #300 XX 50 per tube 50 per tube -500E #500 XX X 1000 per reel -020E -320E -520E #020 #320 #520 300 mil DIP-8 X X X X X X X X 50 per tube 50 per tube 1000 per reel -060E #060 X 50 per tube -360E #360 XX X 50 per tube -560E #560 XX X X 1000 per reel HCPL-0700 HCPL-0701 -000E -500E -060E no option #500 #060 SO-8 X X X X 100 per tube 1500 per reel X 100 per tube -560E #560 XX X 1500 per reel HCNW138 HCNW139 -000E -300E -500E no option #300 #500 400 mil Widebody DIP-8 X X X X X 42 per tube 42 per tube 750 per reel To order.


6N136 HCPL-0700 HCPL-0701


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)