DatasheetsPDF.com

uPD16F15A Dataheets PDF



Part Number uPD16F15A
Manufacturers NEC
Logo NEC
Description 8-bit Single-Chip Microcontroller
Datasheet uPD16F15A DatasheetuPD16F15A Datasheet (PDF)

Preliminary User’s Manual µPD1615A(A), µPD1615B(A), µPD1615F(A), µPD1616F(A), µPD16F15A 8-bit Single-Chip Microcontroller Hardware Document No. U14993EE1V0UM00 Date Published November 2000 © NEC Corporation 2000 µPD1615A(A), µPD1615B(A), µPD1615F(A), µPD1616F(A), µPD16F15A MS-DOS and MS-Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. PC/AT and PC DOS are trademarks of IBM Corp. The related documents in this publication.

  uPD16F15A   uPD16F15A



Document
Preliminary User’s Manual µPD1615A(A), µPD1615B(A), µPD1615F(A), µPD1616F(A), µPD16F15A 8-bit Single-Chip Microcontroller Hardware Document No. U14993EE1V0UM00 Date Published November 2000 © NEC Corporation 2000 µPD1615A(A), µPD1615B(A), µPD1615F(A), µPD1616F(A), µPD16F15A MS-DOS and MS-Windows are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. PC/AT and PC DOS are trademarks of IBM Corp. The related documents in this publication may include preliminary versions. However, preliminary versions are not marked as such. The export of this product from Japan is regulated by the Japanese government. To export this product may be prohibited without governmental license, the need for which must be judged by the customer. The export or re-export of this product from a country other than Japan may also be prohibited without a license from that country. Please call an NEC sales representative. The information in this document is current as of 24.11.2000. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC’s data sheets or data books, etc., for the most up-to-date specifications of NEC semiconductor products. Not all products and/or types are available in every country. Please check with an NEC sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without prior written consent of NEC. NEC assumes no responsibility for any errors that may appear in this document. NEC does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC semiconductor products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of customer’s equipment shall be done under the full responsibility of customer. NEC assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC endeavours to enhance the quality, reliability and safety of NEC semiconductor products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC semiconductor products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. NEC semiconductor products are classified into the following three quality grades: “Standard”, “Special” and “Specific”. The “Specific” quality grade applies only to semiconductor products developed based on a customer-designated “quality assurance program” for a specific application. The recommended applications of a semiconductor product depend on its quality grade, as indicated below. Customers must check the quality grade of each semiconductor product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircrafts, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems or medical equipment for life support, etc. The quality grade of NEC semiconductor products is “Standard“ unless otherwise expressly specified in NEC's data sheets or data books, etc. If customers wish to use NEC semiconductor products in applications not intended by NEC, they must contact an NEC sales representative in advance to determine NEC's willingness to support a given application. Notes: (1) “NEC” as used in this statement means NEC Corporation and also includes its majority-owned subsidiaries. (2) “NEC semiconductor products” means any semiconductor product developed or manufactured by or for NEC (as defined above). M5 2000.03 2 µPD1615A(A), µPD1615B(A), µPD1615F(A), µPD1616F(A), µPD16F15A Regional Information Some information contained in this document may vary from country to country. Before using any NEC product in your application, please contact the NEC office in your country to obtain a list of authorized representatives and dist.


uPD1616F uPD16F15A uPD1615BA


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)