90LV019 Datasheet: DS90LV019





90LV019 DS90LV019 Datasheet

Part Number 90LV019
Description DS90LV019
Manufacture National Semiconductor
Total Page 10 Pages
PDF Download Download 90LV019 Datasheet PDF

Features: DS90LV019 3.3V or 5V LVDS Driver/Receive r August 2000 DS90LV019 3.3V or 5V LV DS Driver/Receiver General Description The DS90LV019 is a Driver/Receiver des igned specifically for the high speed l ow power point-to-point interconnect ap plications. The device operates from a single 3.3V or 5.0V power supply and in cludes one differential line driver and one receiver. The DS90LV019 features a n independent driver and receiver with TTL/CMOS compatibility (DIN and ROUT). The logic interface provides maximum fl exibility as 4 separate lines are provi ded (DIN, DE, RE, and ROUT). The device also features a flow-through pin out w hich allows easy PCB routing for short stubs between its pins and the connecto r. The driver has 3.5 mA output loop cu rrent. The driver translates between TT L levels (single-ended) to Low Voltage Differential Signaling levels. This all ows for high speed operation, while con suming minimal power with reduced EMI. In addition, the differential signaling provides common-mode no.

Keywords: 90LV019, datasheet, pdf, National Semiconductor, DS90LV019, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute, Equivalent

August 2000
DS90LV019
3.3V or 5V LVDS Driver/Receiver
General Description
The DS90LV019 is a Driver/Receiver designed specifically
for the high speed low power point-to-point interconnect ap-
plications. The device operates from a single 3.3V or 5.0V
power supply and includes one differential line driver and
one receiver. The DS90LV019 features an independent
driver and receiver with TTL/CMOS compatibility (DIN and
ROUT). The logic interface provides maximum flexibility as 4
separate lines are provided (DIN, DE, RE, and ROUT). The
device also features a flow-through pin out which allows
easy PCB routing for short stubs between its pins and the
connector. The driver has 3.5 mA output loop current.
The driver translates between TTL levels (single-ended) to
Low Voltage Differential Signaling levels. This allows for high
speed operation, while consuming minimal power with re-
duced EMI. In addition, the differential signaling provides
common-mode noise rejection.
The receiver threshold is ±100 mV over a ±1V common-
mode range and translates the low swing differential levels
to standard (TTL/CMOS) levels.
Features
n LVDS Signaling
n 3.3V or 5.0V operation
n Low power CMOS design
n Balanced Output Impedance
n Glitch free power up/down (Driver disabled)
n High Signaling Rate Capacity (above 100 Mbps)
n Ultra Low Power Dissipation
n ±1V Common-Mode Range
n ±100 mV Receiver Sensitivity
n Product offered in SOIC and TSSOP packages
n Flow-Through Pin Out
n Industrial Temperature Range Operation
Connection Diagram
Block Diagram
DS100053-1
Order Number DS90LV019TM or DS90LV019TMTC
See NS Package Number M14A or MTC14
DS100053-2
TRI-STATE® is a registered trademark of National Semiconductor Corporation.
© 2000 National Semiconductor Corporation DS100053
www.national.com

                    
        






Index : 0  1  2  3   4  5  6  7   8  9  A  B   C  D  E  F   G  H  I  J   K  L  M  N   O  P  Q  R   S  T  U  V   W  X  Y  Z
@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)