USB2.0 Full-Speed / Low-Speed Transceiver
FUSB1500 / FUSB1501 — USB2.0 Full-Speed / Low-Speed Transceiver with Charger Detection
April 2011
FUSB1500 — USB2.0 Fu...
Description
FUSB1500 / FUSB1501 — USB2.0 Full-Speed / Low-Speed Transceiver with Charger Detection
April 2011
FUSB1500 — USB2.0 Full-Speed / Low-Speed Transceiver with Charger Detection
Features
Complies with USB2.0 Specification Supports 12Mbps and 1.5Mbps USB2.0 Speeds
- Single Ended (SE) Mode Signaling - Slew-Rate Controlled Differential Data Driver - Differential Input Receiver with Wide Common-
Mode Range and High Input Sensitivity - Stable RCV Output during SE0 Condition - Two Single-Ended Receivers with Hysteresis
Supports I/O Voltage: 1.65V to 3.6V
Applications
Dual-Camera Applications for Cell Phones Dual-LCD Applications for Cell Phones, Digital
Camera Displays, and Viewfinders
Description
The FUSB1500 is a USB2.0 FS/LS transceiver with resistive charger detection. It is compliant with the Universal Serial Bus Specification, Rev. 2.0 (USB2.0).
Ideal for portable electronic devices; such as mobile phones, digital still cameras, and personal digital assistants; it allows USB Application Specific ICs (ASICs) and Programmable Logic Devices (PLDs) with power supply voltages from 1.65V to 3.6V to interface with the physical layer of the Universal Serial Bus.
The FUSB1500 can be used as a USB device transceiver or a USB host transceiver. It can transmit and receive serial data at both full-speed (12Mbps) and low-speed (1.5Mbps) data rates.
The FUSB1500 supports the SE Mode controller interface.
IMPORTANT NOTE:
For additional performance information, please contact analog...
Similar Datasheet