Single-phase Multifunction Metering
BL6528 Single-phase Multifunction Metering IC
FEATURES
High accuracy. Less than 0.1% error in active energy measuremen...
Description
BL6528 Single-phase Multifunction Metering IC
FEATURES
High accuracy. Less than 0.1% error in active energy measurement and reactive measurement over a dynamic range of 3000:1.
High stability, less than 0.1%error in the output frequency fluctuation. Measure the active power in the positive orientation and negative orientation, transform to fast pulse output
(CF). Measure the reactive power transform to fast pulse output (CF_VAR). Measure the reactive power transform to fast pulse output (CF_VA). Measure instantaneous IRMS and VRMS over a dynamic range of 1500:1. On-chip SAG and zero-crossing detector. On-chip power supply detector. On-chip anti-creep protection with the programmable threshold set. Provide the pulse output with programmable frequency adjustment. Provide the programmable gain adjustment and phase compensation Measure the power factor (PF). Provide a programmable interrupt request signal (/IRQ). Provide a SPI/UART communication interface. On-chip voltage reference of 2.5V. With 3.58MHz external crystal oscillator. Single 5V supply, 30mW(typical) Interrelated patents are pending
DESCRIPTION
The BL6528 is a low cost, high accuracy, high stability, electrical energy measurement IC intended to single phase, multifunction applications.
The BL6528 incorporates two high accuracy Sigma-Delta ADC, voltage reference, power management and digital signal processing circuit using to calculates active energy , reactive energy ,apparent energy...
Similar Datasheet