High Brightness LED Driver
BL9582
32V, 1.4A Step-down High Brightness LED Driver with Internal Switch
FEATURES
DESCRIPTION
Simple low parts co...
Description
BL9582
32V, 1.4A Step-down High Brightness LED Driver with Internal Switch
FEATURES
DESCRIPTION
Simple low parts count
The BL9582 is a continuous mode inductive
Internal 32V NDMOS switch Up to 1.4A output current
step-down converter, designed for driving
Step-DowsninCgleonorvemrutlteiprle series connected LEDs
Single pin on/off and brightness control using DC voltage or PWM
efficiently from a voltage source higher than,
the LED voltage. The device operates from
Soft Start
an input supply between 6V and 32V and
High efficiency (up to 97%)
provides an externally output current up to
Wide input voltage range: 6V to 32V
1.4A. Depending upon supply voltage and
Output shutdown
external components, this can provides up to
Up to 1MHz switching frequency
24 watts of output power.
Inherent open-circuit LED protection
The BL9582 includes the output switch and a
Typical 4% output current accuracy
high-side output current sensing circuit, which
High-side current sense
uses an external resistor to set the nominal
Hysteretic control: no compensation
average output current.
Adjustable constant LED current
Output current can be adjusted by applying
Over temperature protection
an external control signal to the 'ADJ' pin.
Pb-free SOT89-5 packages
The ADJ pin will accept either a DC voltage
or a PWM waveform. During DC dimming,
APPLICATIONS
this will provide a continuous output current
that is proportional to the external applie...
Similar Datasheet