FT240XS-x

FT240X USB 8-BIT FIFO IC Datasheet Version 1.6 Document No.: FT_000626 Clearance No.: FTDI# 259 Future Technology Devices International Ltd. FT240X (USB 8-BIT FIFO IC) The FT240X is interface with a USB to parallel FIFO the following advanced  features:  Single chip USB to parallel FIFO bidirectional  data transfer interface.  Entire USB protocol handled on the chip. No  USB specific firmware programming required.  Fully integrated 2048 byte multi-time-  programmable (MTP) memory, storing device descriptors and FIFO I/O configuration.   Fully integrated clock generation with no external crystal required plus optional clock  output selection enabling glue-less interface to external MCU or FPGA.   Data transfer rates up to 1Mbyte / second.   512 byte receive buffer and 512 byte transmit buffer utilising buffer smoothing technology to  allow for high data throughput.   FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the  requirement for USB driver development in most cases.   Configurable FIFO interface I/O pins.   Synchronous and asynchronous bit bang  interface options.  USB Battery Charger Detection. Allows for USB peripheral devices to detect the presence of a higher power source to enable improved charging. Device supplied pre-programmed with unique USB serial number. USB Power Configurations; supports bus- powered, selfpowered and bus-powered with power switching. Integrated +3.3V level con...