ADNS-6130-001

ADNS-6130-001 Laser Mouse Trim Lens Data Sheet Description The ADNS-6130-001 laser mouse lens are designed for use with Avago Technologies laser mouse sensors and the illumination subsystem provided by the ADNS-6230001 VCSEL assembly clip and the ADNV-6330 or ADNV6340 Single-Mode Vertical-Cavity Surface Emitting Lasers (VCSEL). Together with the VCSEL, the ADNS-6120 or ADNS-6130-001 laser mouse lens provides the directed illumination and optical imaging necessary for proper operation of the laser mouse sensor. ADNS-6130-001 laser mouse lens is a precision molded optical component and should be handled with care to avoid scratching of the optical surfaces. Max +0.2mm protrusion is allowed at the molding gate of either 1 side of lens. Figure 1. ADNS-6130-001 laser mouse trim lens outline drawings and details MOUSE SENSOR LID ADNS-6130-001 A OBJECT SURFACE Figure 2. Optical system assembly cross-section diagram B Figure 3. Logo location Mechanical Assembly Requirements All specifications reference Figure 2, Optical System Assembly Diagram Parameters Symbol Min. Typical Max. Distance from Object Surface to Lens Reference Plane A 2.18 2.40 2.62 Distance from Mouse Sensor Lid Surface to Object Surface B 10.65 Units mm mm Conditions ADNS-6130-001 Sensor lid must be in contact with lens housing surface Lens Design Optical Performance Specifications All specifications are based on the Mechanical Assembly Requirements. Parameters Design Wavelength Symbol l Min. ...