OCTAL BUFFER/LINE DRIVER
NEW PRODUCT
74LVCH244A
OCTAL BUFFER/LINE DRIVER WITH BUS HOLD / 3 STATE OUTPUTS
Description
The 74LVCH244A provides tw...
Description
NEW PRODUCT
74LVCH244A
OCTAL BUFFER/LINE DRIVER WITH BUS HOLD / 3 STATE OUTPUTS
Description
The 74LVCH244A provides two 4-bit line drivers with separate output-enable (OE) inputs. When OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state.
The device is designed for operation with a power supply range of 1.65V to 3.6V.
Pin Assignments
1 1OE 20 Vcc
The inputs are tolerant to 5.5V allowing this device to be used in a mixed voltage environment. The device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down.
Bus hold circuitry holds unused or un-driven inputs at a high or low logic state. The use of external pull-up or pull down resistors is not recommended.
Features
Supply Voltage Range from 1.65V to 3.6V Sinks or Sources 24mA at VCC = 3V CMOS Low Power Consumption IOFF Supports Partial-Power Down Operation Inputs or Outputs Accept up to 5.5V Inputs Can be Driven by 3.3V or 5V Allowing for Mixed Voltage
Applications Schmitt Trigger Action at All Inputs Typical VOLP (Quiet Output Ground Bounce) less than 0.8V with
VCC = 3.3V and TA = +25°C Typical VOHV (Quiet Output Dynamic VOH) greater than 2.0V
with VCC = 3.3V and TA = +25°C ESD Protection Tested per JESD 22 Exceeds 200-V Machine Model (A115) Exceeds 2000-V Human Body Model (A114) Exceeds 1000-V Charg...
Similar Datasheet