3A Integrated Synchronous Buck Converter
NCP3133A
Integrated Synchronous
Buck Converter
3A
NCP3133A is a fully integrated synchronous buck converter for 3.3 V a...
Description
NCP3133A
Integrated Synchronous
Buck Converter
3A
NCP3133A is a fully integrated synchronous buck converter for 3.3 V and 5 V step−down applications. It can provide up to 3 A load current. NCP3133A supports high efficiency, fast transient response and provides power good indicator. The control scheme includes two operation modes: FCCM and automatic CCM/DCM. In automatic CCM/DCM mode, the controller can smoothly switch between CCM and DCM, where converter runs at reduced switching frequency with much higher efficiency. NCP3133A is available in 3 mm x 3 mm QFN−16 pin package.
Features
High Efficiency in both CCM and DCM High Operation Frequency at 1.1 MHz Support MLCC Output Capacitor Small Footprint, 3 mm x 3 mm, 16−pin QFN Package Up to 3 A Continuous Output Current 2.9 V to 5.5 V Wide Conversion Voltage Range Output Voltage Range from 0.6 V to 0.84 X Vin Internal 400 ms Soft−Start Automatic Power−Saving Mode Voltage Mode Control Support Pre-bias Start−up Functionality Output Discharge Operation Over−Temperature Protection Built−in Over−Voltage, Under−Voltage and Over-Current Protection Power Good Indicator This is a Pb−Free Device
Applications
5 V Step Down Rail 3.3 V Step Down Rail
www.onsemi.com
1
QFN16 3 x 3, 0.5P CASE 485DA
SUGGESTED PIN ARRANGEMENT
PGND PGND VIN VIN 16 15 14 13
EN 1
12 VDD
NC 2 PGD 3
NCP3133A
11 AGND 10 FB
VBST 4
9 COMP
5678 SW SW SW PS
MARKING DIAGRAM
3133A ALYWG
G
3133A A L Y W
G
= Specific Device C...
Similar Datasheet