Dual SPDT Analog Switch
NLAS52231
Ultra-Low 0.4 W Dual SPDT Analog Switch with Overshoot Protection
The NLAS52231 is a dual SPDT analog switch ...
Description
NLAS52231
Ultra-Low 0.4 W Dual SPDT Analog Switch with Overshoot Protection
The NLAS52231 is a dual SPDT analog switch with overshoot protection on the signal lines. It is ideally suited for audio applications that require very low RON values for maximum signal transfer. The overshoot protection included in the NLAS52231 allows analog signals on the COM, NO or NC lines to swing safely above VCC without incurring significant leakage. This feature provides added protection against undesirable leakage or damage to the device in the event that an incoming audio signal spikes above its nominal level.
The NLAS52231 features a wide VCC operating range, 1.65 V−4.5 V. It is capable of interfacing with control input select line voltages, VIN, as low as 1.3 V for a VCC of 3.0 V. The NLAS52231 is offered in a very small 1.4mm x 1.8mm 10−pin UQFN package.
Features
Ultra−Low RON: 0.4 W at VCC = 4.2 V Overshoot Protection: VIS can safely rise up to 1.1 V above VCC VCC Range: 1.65 V to 4.5 V 1.4 x 1.8 x 0.55 mm UQFN10 These are Pb−Free Devices
Typical Applications
Mobile Phones Portable Devices
Audio Terminal
NLAS52231
AUDIO Source #1
AUDIO Source #2
Figure 1. Applications Diagram
http://onsemi.com
MARKING DIAGRAM
UQFN10
S2MG
CASE 488AT
G
1
S2 = Specific Device Code M = Date Code/Assembly Location G = Pb−Free Device
(Note: Microdot may be in either location)
IN2 8 COM2 9
NO2 10
NC2 7
GND 6
12 VCC NO1
5 NC1 4 IN1 3 COM1
IN 1, 2
0 1
FUNCTION TABLE NO 1, 2
OFF ...
Similar Datasheet