ESD Protection Diode
ESD8040
ESD Protection Diode
Low Capacitance Array for High Speed Video Interfaces
The ESD8040 is designed specificall...
Description
ESD8040
ESD Protection Diode
Low Capacitance Array for High Speed Video Interfaces
The ESD8040 is designed specifically to protect HDMI and Display Port Interfaces with full functionality ESD protection and back drive current protection for VCC line. Ultra−low capacitance and low ESD clamping voltage make this device an ideal solution for protecting voltage sensitive high speed data lines. The flow−through style package allows for easy PCB layout and matched trace lengths necessary to maintain consistent impedance for the high speed TMDS lines.
Features
Full Function HDMI / Display Port Solution Single Connect, Flow through Routing for TMDS Lines Low Capacitance (0.35 pF Max, I/O to GND) Protection for the Following IEC Standards:
IEC 61000−4−2 Level 4
UL Flammability Rating of 94 V−0 This is a Pb−Free Device
Typical Applications
HDMI 1.3/1.4/2.0 Display Port
MAXIMUM RATINGS (TJ = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Operating Junction Temperature Range TJ −55 to +125 °C
Storage Temperature Range
Tstg − 55 to +150 °C
Lead Solder Temperature − Maximum (10 Seconds)
TL 260 °C
IEC 61000−4−2 Contact (ESD) IEC 61000−4−2 Air (ESD)
ESD ESD
±15 kV ±15 kV
Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected.
http://onsemi.com
MARKING DIAGRAM
18 UDFN18 1 CASE 517CP
8040MG G
8...
Similar Datasheet