LB1205

Ordering number : EN1831F LB1205 Monolithic Digital IC High-Voltage, Large-Current Darlington Driver http://onsemi.com Overview The LB1205 is a 4-unit, high withstand voltage (65V), large-current (1.5A) Darlington driver array with input low active configuration and sync output. Features  4-unit, high withstand voltage design (65V), large-current (1.5A) Darlington driver.  PNP input type (low active).  On-chip spark killer diodes.  On-chip input protection diodes.  Capable of being driven directly from 5V operated CMOS, TTL. Specifications Absolute Maximum Ratings at Ta = 25C Parameter Maximum supply voltage Output supply voltage Input supply voltage Output current Spark killer diode forward current Allowable power dissipation Symbol VDD max VCC max VO max VIN max IO max IFS Pd max Operating temperature Storage temperature Topr Tstg Conditions VIN  GND Independent IC Mounted on the recommended PCB DIP16F(300mil) Ratings 7.0 62 65 VDD-7.0 to VDD-10.0 1.5 1.5 1.9 2.6 -20 to +75 -55 to +150 Unit V V V V A A W W C C Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. Allowable Operating Conditions at Ta = 25C Parameter Supply voltage range Input “ON” level voltage Input “OFF” level voltage Symbol VDD VINon VINoff Conditions VIN  GND, IO = 1.0A IO  30A Ratings 3.5 to 7.0 VDD-7.0 to VDD-2.6 ...