POWER SUPPLY SUPERVISOR
EST7502C/EST7502CS POWER SUPPLY SUPERVISOR WITH PWM CONTROLLER
Description
The EST7502C is designed with a pulse-width-...
Description
EST7502C/EST7502CS POWER SUPPLY SUPERVISOR WITH PWM CONTROLLER
Description
The EST7502C is designed with a pulse-width-modulation control circuit and a complete power supervisor for use in the switched mode power supply . It contains various functions, like under voltage protection (UVP), over voltage protection (OVP), power good output (PG) and ON/OFF control (REM). UVP(Under voltage protection) function is for +3.3V, +5V, +12V outputs. OVP(Over voltage protection) function is for +3.3V, +5V, +12V and PT is for extra protection input. PG(Power good signal) is a safe operation signal to inform the external parts. REM(Remote on/off) is used to control the SMPS on/off. The REM control signal has the on/off transferred debounce–time.
PIN CONFIGURATION (Top View)
FEATURE
■ 3-channel under voltage protection (UVP) ■ 3-channel over voltage protection (OVP) ■ 1-channel extra protection (PT) ■ 1-channel sense input to control the PG (SEN) ■ Remote on/off control function (REM) ■ Dual output for push-pull operation (OP1/OP2) ■ Soft start capability by external capacitor (SS) ■ VCC under voltage lockout ■ 16-Pin dual in-line package ■ Pb-free Package are available
ORDERING INFORMATION
ORDER NUMBER EST7502C EST7502C
Package DIP-16 (Pb-free) SOP-16(Pb-free)
REFERENCE APPLICATION CIRCUIT
Shipping Tube Tube
Top Marking EST.7502C EST.7502C
www.esthome.com
1
2012.5.1 Rev.A1.5 datasheet
EST7502C POWER SUPPLY SUPERVISOR WITH PWM CONTROLLER
PIN DESCRIPTION
Pin Symbol 1 V33 2 V5 3 V...
Similar Datasheet