Motor Protection Relay
Relay
Protection Relay
NJBK6 Series Motor Protection Relay
1. General NJBK6 series motor protection relay is used to pro...
Description
Relay
Protection Relay
NJBK6 Series Motor Protection Relay
1. General NJBK6 series motor protection relay is used to provide
overload, phase failure, three-phase current unbalance and locked rotor protection for AC motors with a frequency of AC 50Hz, a rated insulation voltage of below 690V and a rated operational current of 1A~36A that operate continuously or intermittently.
Standards: IEC 60947-4-1
2. Type designation N JBK 6 - 36 / □ / □ / □
Type of operation delay
Rated control supply voltage
Setting current code
Frame size
Design sequence No.
Motor protection relay
Company code
3. Operation conditions 3.1 Altitude: should not exceed 2000m; 3.2 Ambient tempeature: -5℃~+40℃, and the average temperature in 24h should not exceed +35℃; 3.3 Atmospheric conditions: The relative air humidity should not exceed 50% at the maximum temperature of +40℃. The relative humidity may be higher at lower temperatures, for example, the air humidity can be up to 90% at +20℃. Special measures should be taken if condensation occurs on the product occasionally due to temperature variation; 3.4 Pollution degree: 3; 3.5 The inclination between the mounting plane and the vertical plane should not exceed ±5°; 3.6 In non-explosive media that do not contain a sufficient amount of gas or conductive dust to cause metal corrosion or insulation failure; 3.7 In places with rain and snow protection equipment and not full of vapor; 3.8 In places where there is no significant shake, impact or vibration; 3.9 ...
Similar Datasheet