AMIS-30663

AMIS-30663 High Speed CAN Transceiver Introduction The AMIS−30663 CAN transceiver is the interface between a controller area network (CAN) protocol controller and the physical bus and may be used in both 12 V and 24 V systems. The digital interface level is powered from a 3.3 V supply providing true I/O voltage levels for 3.3 V CAN controllers. The transceiver provides differential transmit capability to the bus and differential receive capability to the CAN controller. Due to the wide common−mode voltage range of the receiver inputs, the AMIS−30663 is able to reach outstanding levels of electromagnetic susceptibility (EMS). Similarly, extremely low electromagnetic emission (EME) is achieved by the excellent matching of the output signals. Key Features Fully Compatible with the “ISO 11898−2” Standard Certified “Authentication on CAN Transceiver Conformance (d1.1)” High Speed (up to 1 Mbit/s) Ideally Suited for 12 V and 24 V Industrial and Automotive Applications Low EME Common−mode−choke is No Longer Required Differential Receiver with Wide Common−mode Range (±35 V) for High EMS No Disturbance of the Bus Lines with an Un−powered Node Transmit Data (TxD) Dominant Time−out Function Thermal Protection Bus Pins Protected Against Transients in an Automotive Environment Short Circuit Proof to Supply Voltage and Ground Logic Level Inputs Compatible with 3.3 V Devices ESD Protection Level for CAN Bus up to ±8 kV This is a Pb−Free Device http://onsemi.com ...