MD6030NSZ-0

EMKAY PRODUCT SPECIFICATION Doc: MD6030NSZ-0 This specification applies to the electret condenser microphone outlined within this document. Model Number: MD6030NSZ-0 Dimensions: (All dimensions are in mm) Size: Ø 6.0 x 3.0 Directivity: NOISE CANCELLING Board Type: SOLDER Capacitor(s) None Electrical Specifications CHARACTERISTIC Directional Characteristic Electret Type Sensitivity Impedance Frequency Range Max input Sound Level Standard Operating Voltage Maximum operating Voltage Current Consumption Sensitivity Reduction S/N Ratio Capacitor(s) SPECIFICATION VALUES NOISE CANCELLING CHRG DIA/FOIL -39 dB ± 4.0 2.200 kΩ 300-6,000 Hz 120dB 3.0 V 10 V 0.500 mA Within -3dB at 2.5V More than 55 dB None NOTES (0dB=1 V/Pa, 1kHz) Less than Hz S.P.L. V V Max Frequency Response Curve Schematic Diagram EMKAY EMKAY Innovative Products A Knowles Electronics LLC 1151 Maplewood Drive, Itasca, Illinois 60143 Tel: 630-250-5100 Fax: 630-250-5932 www.emkayproducts.com EMKAY PRODUCT SPECIFICATION Polar Pattern: Polar plot shows reponce of unit at 1000 Hz. Doc: MD6030NSZ-0 Environmental Specifications Note: After any of the following tests performed, the sensitivity of the microphone unit shall not deviate more than ±3dB from its initial value. The microphone shall maintain its initial operation and appearance. Operating Temperatur -25°C to +55°C Storage Temperature: -25°C to +60°C Humidity: +40°C at 95%RH for 240 hrs Temperature Cycles: After exposure at -25°C for 30 ...