Low Voltage Single SPST Normally Open Analog Switch with TTL Compatible Control Input
FSAT66 Low Voltage Single SPST Normally Open Analog Switch with TTL Compatible Control Input
April 2003 Revised July 20...
Description
FSAT66 Low Voltage Single SPST Normally Open Analog Switch with TTL Compatible Control Input
April 2003 Revised July 2004
FSAT66 Low Voltage Single SPST Normally Open Analog Switch with TTL Compatible Control Input
General Description
The FSAT66 is a high speed single pole/single throw normally open Analog Switch with a TTL compatible control input and is fabricated on a sub-micron CMOS process. The low On Resistance of the switch allows input to be connected to output with minimal propagation delay and without generating additional ground bounce noise. The device is organized as a 1-bit switch with a switch enable (OE) signal. When OE is HIGH, the switch is on and Port A is connected to Port B. When OE is LOW, the switch is open and a high-impedance state exists between the two ports.
Features
s Space saving SC70 5-lead package s Ultra small MicroPak leadless package s Broad VCC Operating Range 1.65V to 5.5V s Rail-to-rail signal handling s 5Ω switch connection between two ports s Minimal propagation delay through the switch s Low ICC s Zero bounce in flow-through mode s Control input compatible with TTL input levels s >250 MHz–3dB bandwidth
Ordering Code:
Product Order Number FSAT66M5X (Preliminary) FSAT66P5X FSAT66L6X Package Number MA05B MAA05A MAC06A Code Top Mark AT66 T66 EF 5-Lead SOT23, JEDEC MO-178, 1.6mm 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 6-Lead MicroPak, 1.0mm Wide 3K Units on Tape and Reel 3K Units on Tape and Reel 5K Units on Tape and Reel Package Descrip...
Similar Datasheet