GBL404

Production specification Silicon Bridge Rectifiers GBL4005--GBL410 FEATURES z Ideal for printed circuit board z Reliable low cost construction utilizing molded plastic technique results in inexpensive product Pb Lead-free z Plastic materrial has U/L flammability classification 94V-O z Mounting position: Any z Glass passivated chip junctions MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25℃ ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate by 20%. GBL 4005 GBL 401 GBL 402 GBL 404 GBL 406 GBL 408 Maximum recurrent peak reverse voltage VRRM 50 100 200 400 600 800 Maximum RMS voltage VRMS 35 70 140 280 420 560 Maximum DC blocking voltage VDC Maximum average forward Output current @TC=50℃ Peak forward surge current 8.3ms single half-sine-wave superimposed on rated load Maximum instantaneous forward voltage @2.0A Maximum reverse current @TA=25℃ at rated DC blocking voltage @TC=100℃ Typical junction capacitance per leg (note 1) Typical thermal resistance per leg (note 2) (note 3) Operating junction temperature range IF(AV) IFSM VF IR CJ RθJL RθJL TJ 50 100 200 400 600 800 4.0 150.0 1.0 5.0 500 65 34 15 - 55 ---- + 150 25 Storage temperature range TSTG - 55 ---- + 150 NOTE: 1. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts. 2. Units mounted on P.C.B. with 0.5x0.5" (12x12mm) copper pads and 0.375" (9.5mm) lead length. 3. Unit case mounted...