HYBRID IC
DESCRIPTION
VLA542 is a hybrid integrated circuit designed for driving n-channel IGBT modules in any gate-amplifier appl...
Description
DESCRIPTION
VLA542 is a hybrid integrated circuit designed for driving n-channel IGBT modules in any gate-amplifier application. This device operates as an isolation amplifier for these modules and provides the required electrical isolation between the input and output with an opto-coupler. Recommended IGBT modules:
VCES = 600V series up to 600A class VCES = 1200V series up to 400A class
FEATURES
Electrical isolation between input and output with opto-coupler (Viso = 2500Vrms for 1minute)
Two supply driver topology Built-in short circuit protection circuit(With a pin for fault out) CMOS compatible input interface
HYBRID IC
VLA542-01R
Hybrid IC for driving IGBT modules
OUTLINE DRAWING
Dimensions : mm
44 MAX
26MAX
5.5MAX
2.54
1
0.5
+0.15 -0.1
14
5.5 MAX 5.5 MAX
4.5+/-1.5
0.25
0.2 0.1
3.0 MAX 8 MAX
APPLICATIONS
To drive IGBT modules for inverter or AC servo systems application
BLOCK DIAGRAM
VI + 14 VI - 13
LATCH
DETECT CIRCUIT
TIMER & RESET CIRCUIT
INTERFACE
OPTO-COUPLER 240 ohm
GATE SHUTDOWN CIRCUIT
4 VCC 2 CONTROL PIN
FOR ttrip
1 DETECT
5 VO
8 FAULT OUTPUT
6 VEE
3,7,9,10 pin : Non connection
HYBRID IC
VLA542-01R
Hybrid IC for driving IGBT modules
MAXIMUM RATINGS (unless otherwise noted, Ta=25°C)
Symbol
Parameter
Conditions
VCC Supply voltage VEE VI Input signal voltage
DC
Applied between; 13pin and 14pin 50% duty cycle, pulse width 1ms
VO IOHP IOLP Viso
Output voltage Output peak current Isolation voltage
When the output voltage is “H” P...
Similar Datasheet