PCA9654E

PCA9654E, PCA9654EA 8-bit I/O Expander for I2C Bus and SMBus with Interrupt The PCA9654E/PCA9654EA provides 8 bits of General Purpose parallel Input/Output (GPIO) expansion for I2C−bus/SMBus applications. The PCA9654E/PCA9654EA consists of 8−bit Configuration (Input or Output selection), Input, Output and Polarity Inversion (active HIGH or active LOW operation) registers. The system master may set the I/Os as either inputs or outputs by writing to the I/O configuration bits. The data for each Input or Output is kept in the corresponding Input or Output register. The polarity of the read register can be inverted with the Polarity Inversion register. All registers can be read by the system master. The PCA9654E/PCA9654EA open−drain interrupt (INT) output is activated when any input state differs from its corresponding input port register state and is used to indicate to the system master that an input state has changed. The power−on reset sets the registers to their default values and initializes the device state machine. Three hardware pins (AD0, AD1, AD2) vary the fixed I2C bus address and allow up to 64 devices to share the same I2C−bus/SMBus. The PCA9654EA has a different address map from the PCA9654E. Features VDD Operating Range: 1.65 V to 5.5 V SDA Sink Capability: 30 mA 5.5 V Tolerant I/Os Polarity Inversion Register Active LOW Interrupt Output Low Standby Current Noise Filter on SCL/SDA Inputs No Glitch on Power−up Internal Power−on Reset 64 Programm...