Photo flash LED driver
SSL3252
Photo flash LED driver
Rev. 1 — 7 July 2011
Product data sheet
1. General description
The SSL3252 is a photo f...
Description
SSL3252
Photo flash LED driver
Rev. 1 — 7 July 2011
Product data sheet
1. General description
The SSL3252 is a photo flash LED driver designed for battery operated mobile devices such as mobile phones and PDAs. The boost converter delivers high performance and drives a single or dual high brightness LED at up to 500 mA with over 85 % efficiency. The driver can be programmed to operate in Flash mode, Torch mode, Assist light mode, or Indicator mode.
The small silicon size and the high internal switching frequency of 2 MHz minimize the size of the application and make the SSL3252 very suitable for mobile phones where space is limited, and only requiring three external components. System protection has been a very important part of the SSL3252 design, so a time-out function can be programmed to prevent overstressing the LED, and the driver itself is protected from overheating.
2. Features and benefits
High power single or dual LED output driving up to 500 mA flash current Separate indicator LED output of 2.5 mA to 10 mA High side current source for main and indicator LEDs Output voltage of up to 8.85 V Wide input voltage ranging from 2.5 V to 5.5 V High efficiency of over 85 % at optimum output current Switching frequency of 2 MHz Flash mode, Assist light mode, Torch mode and Indicator mode are supported Internally timed flash operation up to 850 ms I2C-bus, programmable up to 400 kHz Strobe signal to avoid I2C latency for the flash Direct enable signal...
Similar Datasheet