NCP715

Linear Voltage Regulator Ultra-Low Iq, Wide Input Voltage, Low Dropout 50 mA NCP715 The NCP715 is 50 mA LDO Linear Voltage Regulator. It is a very stable and accurate device with ultra−low ground current consumption (4.7 mA over the full output load range) and a wide input voltage range (up to 24 V). The regulator incorporates several protection features such as Thermal Shutdown and Current Limiting. Features Operating Input Voltage Range: 2.5 V to 24 V Fixed Voltage Options Available: 1.2 V to 5.3 V Ultra Low Quiescent Current: Max. 4.7 mA Over Full Load and Temperature ±2% Accuracy Over Full Load, Line and Temperature Variations PSRR: 52 dB at 100 kHz Noise: 190 mVRMS from 200 Hz to 100 kHz Thermal Shutdown and Current Limit protection Available in XDFN6 1.5 x 1.5 mm, SC−70 (SC−88A) and TSOP−5 Packages These are Pb−Free Devices Typical Applications Portable Equipment Communication Systems 2.5 V < Vout < 24 V IN OUT 1.2 V < Vout < 5.3 V 1 mF Ceramic NCP715 NC NC GND 1 mF Ceramic XDFN6 CASE 711AE DATA SHEET www.onsemi.com MARKING DIAGRAMS XX MG G 1 SC−70−5 (SC−88A) CASE 419A XX MG G 5 1 TSOP−5 CASE 483 5 XXX MG G 1 XX = Specific Device Code M = Date Code G = Pb−Free Package (Note: Microdot may be in either location) ORDERING INFORMATION See detailed ordering and shipping information on page 19 of this data sheet. Figure 1. Typical Application Schematic © Semiconductor Components Industries, LLC, 2016 1 September, 2022 − Rev. 7...