LM6060

OUTLINE DRAWING Full Graphics Type LCD Module LM6060 series TERMINAL FUNCTIONS Pin Name Descriptions 80 mode 68 mode Serial mode 1 /CS1 Chip selection /CS1=L, enable access to the LCD module /CS1=H, disable access to the LCD module 2 /RES Reset Signal 3 A0 Register Select 4 /WR /WR=L→ H R/W=H, Not use (R/W) /RD=H; Data or E=H; Leave open or pull Hi Data or status Instruction read from the latch into the LCD module LCD module R/W=L, 5 /RD(E) /WR=H, /RD=L E=H→ L Data or Data or status Instruction read from the latch into the LCD module LCD module 6 D0 8 bit Data Bus Not use : : There state I/O Terminal for display data or instruction data 11 D5 12 D6 Serial clock input (SCL) 13 D7(SI) Serial data input 14 VDD Positive Power Supply 15 VSS 0V Power Supply 16 BLA LED Backlight Positive Power Supply 17 BLK LED Backlight Negative Power Supply 18 NC No Connection, leave open DISPLAY CHARACTERISTICS Item Value LCD Display Mode＊ STN-YG, Positive, Transflective Viewing Angle 6:00 Driving Method 1/65 duty, 1/9 bias Backlight＃ YG LED Backlight MECHANICAL DATA Item Outline (mm) Viewing Area (mm) Active Area (mm) Dot Pitch (mm) Dot Size (mm) Value 73.0 x 42.0 x 13.1MAX 55.0 x 30.6 52.44 x 26.2 0.41 x 0.41 0.37 x 0.37 ABSOLUTE MAXIMUM Item Symbol Min Max Operating Voltage (V) VDD -0.3 +3.4 Operating Temperature (°C) TOP -20 +70 Storage Temperature (°C) TST -30 +80 ELECTRICAL CHARACTERISTICS※ Item Symbol Min Typ Max Operating Vol...