IR Receiver
www.vishay.com
TSOP382.., TSOP384..
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
1 2 3
19026...
Description
www.vishay.com
TSOP382.., TSOP384..
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
1 2 3
19026
LINKS TO ADDITIONAL RESOURCES
Product Page
3D 3D
3D Models
Calculators
Marking
Packages
FEATURES Very low supply current Photo detector and preamplifier in one package Internal filter for PCM frequency Supply voltage: 2.5 V to 5.5 V Improved immunity against ambient light Insensitive to supply voltage ripple and noise Material categorization:
for definitions of compliance please see www.vishay.com/doc?99912
MECHANICAL DATA Pinning for TSOP382.., TSOP384..: 1 = OUT, 2 = GND, 3 = VS
Holders
Bends and Cuts
DESCRIPTION
These products are miniaturized IR receiver modules for infrared remote control systems. A PIN diode and a preamplifier are assembled on a leadframe, the epoxy package contains an IR filter.
The demodulated output signal can be directly connected to a microprocessor for decoding.
The TSOP384.. series devices are optimized to suppress almost all spurious pulses from energy saving lamps like CFLs. The AGC4 used in the TSOP384.. may suppress some data signals. The TSOP382.. series are provided primarily for compatibility with old AGC2 designs. New designs should prefer the TSOP384.. series containing the newer AGC4.
These components have not been qualified according to automotive specifications.
ORDERING CODE TSOP38... - 1500 pieces in bags
BLOCK DIAGRAM
16833-13
3
30 kΩ
1
Input
AGC
Band pass
Demodulator
2
PIN
Cont...
Similar Datasheet