TSOP38240

www.vishay.com TSOP382.., TSOP384.. Vishay Semiconductors IR Receiver Modules for Remote Control Systems 1 2 3 19026 LINKS TO ADDITIONAL RESOURCES Product Page 3D 3D 3D Models Calculators Marking Packages FEATURES Very low supply current Photo detector and preamplifier in one package Internal filter for PCM frequency Supply voltage: 2.5 V to 5.5 V Improved immunity against ambient light Insensitive to supply voltage ripple and noise Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 MECHANICAL DATA Pinning for TSOP382.., TSOP384..: 1 = OUT, 2 = GND, 3 = VS Holders Bends and Cuts DESCRIPTION These products are miniaturized IR receiver modules for infrared remote control systems. A PIN diode and a preamplifier are assembled on a leadframe, the epoxy package contains an IR filter. The demodulated output signal can be directly connected to a microprocessor for decoding. The TSOP384.. series devices are optimized to suppress almost all spurious pulses from energy saving lamps like CFLs. The AGC4 used in the TSOP384.. may suppress some data signals. The TSOP382.. series are provided primarily for compatibility with old AGC2 designs. New designs should prefer the TSOP384.. series containing the newer AGC4. These components have not been qualified according to automotive specifications. ORDERING CODE TSOP38... - 1500 pieces in bags BLOCK DIAGRAM 16833-13 3 30 kΩ 1 Input AGC Band pass Demodulator 2 PIN Cont...