Document
www.vishay.com
TSOP382.., TSOP384..
Vishay Semiconductors
IR Receiver Modules for Remote Control Systems
1 2 3
19026
LINKS TO ADDITIONAL RESOURCES
Product Page
3D 3D
3D Models
Calculators
Marking
Packages
FEATURES • Very low supply current • Photo detector and preamplifier in one package • Internal filter for PCM frequency • Supply voltage: 2.5 V to 5.5 V • Improved immunity against ambient light • Insensitive to supply voltage ripple and noise • Material categorization:
for definitions of compliance please see www.vishay.com/doc?99912
MECHANICAL DATA Pinning for TSOP382.., TSOP384..: 1 = OUT, 2 = GND, 3 = VS
Holders
Bends and Cuts
DESCRIPTION
These products are miniaturized IR receiver modules for infrared remote control systems. A PIN diode and a preamplifier are assembled on a leadframe, the epoxy package contains an IR filter.
The demodulated output signal can be directly connected to a microprocessor for decoding.
The TSOP384.. series devices are optimized to suppress almost all spurious pulses from energy saving lamps like CFLs. The AGC4 used in the TSOP384.. may suppress some data signals. The TSOP382.. series are provided primarily for compatibility with old AGC2 designs. New designs should prefer the TSOP384.. series containing the newer AGC4.
These components have not been qualified according to automotive specifications.
ORDERING CODE TSOP38... - 1500 pieces in bags
BLOCK DIAGRAM
16833-13
3
30 kΩ
1
Input
AGC
Band pass
Demodulator
2
PIN
Control circuit
APPLICATION CIRCUIT
17170-11
Transmitter IR receiver
with TSALxxxx
VS
Circuit
OUT GND
R1
C1 VO
+ VS μC
GND
R1 and C1 recommended to reduce supply ripple for VS < 2.8 V
Rev. 1.9, 13-Apr-2022
1
Document Number: 82491
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
www.vishay.com
TSOP382.., TSOP384..
Vishay Semiconductors
PARTS TABLE
AGC
Carrier frequency
Package Pinning Dimensions (mm) Mounting Application Best choice for Special options
30 kHz 33 kHz 36 kHz 38 kHz 40 kHz 56 kHz
LEGACY, FOR LONG BURST REMOTE CONTROLS (AGC2)
RECOMMENDED FOR LONG BURST CODES (AGC4)
TSOP38230
TSOP38430
TSOP38233
TSOP38433
TSOP38236
TSOP38436 (1)(2)(3)
TSOP38238
TSOP38438 (4)(5)
TSOP38240
TSOP38440
TSOP38256
TSOP38456 (6)(7)
Minicast
1 = OUT, 2 = GND, 3 = VS 5.0 W x 6.95 H x 4.8 D
Leaded
Remote control
(1) RC-5 (2) RC-6 (3) Panasonic (4) NEC (5) Sharp (6) r-step (7) Thomson RCA
• Low voltage option: www.vishay.com/doc?82382
ABSOLUTE MAXIMUM RATINGS
PARAMETER
TEST CONDITION
SYMBOL
VALUE
UNIT
Supply voltage
VS
-0.3 to +6
V
Supply current
IS
3
mA
Output voltage
VO
-0.3 to (VS + 0.3)
V
Output current
IO
5
mA
Junction temperature
Tj
100
°C
Storage temperature range
Tstg
-25 to +85
°C
Operating temperature range
Tamb
-25 to +85
°C
Power consumption
Tamb ≤ 85 °C
Ptot
10
mW
Soldering tempera.