Stepper-Motor Driver. TLE4728G Datasheet

TLE4728G Driver. Datasheet pdf. Equivalent

Part TLE4728G
Description 2-Phase Stepper-Motor Driver
Feature 2-Phase Stepper-Motor Driver TLE 4728 G Overview Features • 2 × 0.7 amp. full bridge outputs • Int.
Manufacture Infineon Technologies
Datasheet
Download TLE4728G Datasheet



TLE4728G
2-Phase Stepper-Motor Driver
TLE 4728 G
Overview
Features
• 2 × 0.7 amp. full bridge outputs
• Integrated driver, control logic and current control
(chopper)
• Fast free-wheeling diodes
• Max. supply voltage 45 V
• Output stages are free of crossover current
• Offset-phase turn-ON of output stages
• All outputs short-circuit proof
• Error-flag for overload, open load, overtemperature
• SMD package P-DSO-24-3
Bipolar-IC
Type
TLE 4728 G
Ordering Code
Q67006-A9077
Package
P-DSO-24-9
Description
TLE 4728 G is a bipolar, monolithic IC for driving bipolar stepper motors, DC motors and
other inductive loads that operate by constant current. The control logic and power
output stages for two bipolar windings are integrated on a single chip which permits
switched current control of motors with 0.7 A per phase at operating voltages up to 16 V.
The direction and value of current are programmable for each phase via separate control
inputs. A common oscillator generates the timing for the current control and turn-on with
phase offset of the two output stages. The two output stages in full-bridge configuration
include fast integrated free wheeling diodes and are free of crossover current. The
device can be driven directly by a microprocessor in several modes by programming
phase direction and current control of each bridge independently.
With the two error outputs the TLE 4728 G signals malfunction of the device. Setting the
control inputs high resets the error flag and by reactivating the bridges one by one the
location of the error can be found.
Data Sheet 1 2004-03-01



TLE4728G
TLE 4728 G
TLE 4728 G
Ι 10
Ι 11
Phase 1
OSC
GND
GND
GND
GND
Q11
R1
+ VS
Q12
1
2
3
4
5
6
7
8
9
10
11
12
24
23
22
21
20
19
18
17
16
15
14
13
IEP01211
Ι 20
Ι 21
Phase 2
Error 1
GND
GND
GND
GND
Q21
R2
Error 2
Q22
Figure 1 Pin Configuration (top view)
Data Sheet 2 2004-03-01





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)