Octal Bus Switch with 25 Series Resistor in Outputs (Preliminary)
Preliminary
FST32245 Octal Bus Switch with 25Ω Series Resistor in Outputs (Preliminary)
June 2001 Revised June 2001
F...
Description
Preliminary
FST32245 Octal Bus Switch with 25Ω Series Resistor in Outputs (Preliminary)
June 2001 Revised June 2001
FST32245 Octal Bus Switch with 25Ω Series Resistor in Outputs (Preliminary)
General Description
The Fairchild Switch FST32245 provides 8-bits of highspeed CMOS TTL-compatible bus switching in a standard ’245 pin-out. The low On Resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. The device is organized as an 8-bit switch. When OE is LOW, the switch is ON and Port A is connected to Port B. When OE is HIGH, the switch is OPEN and a high-impedance state exists between the two ports. The FST32245 has an equivalent 25Ω series resistors to reduce signal-reflection noise, eliminating the need for external terminating resistors.
Features
s 25Ω switch connection between two ports s Minimal propagation delay through the switch s Low lCC s Zero bounce in flow-through mode s Control inputs compatible with TTL level
Ordering Code:
Order Number FST32245WM FST32245QSC FST32245MTC Package Number M20B MQA20 MTC20 Package Description 20-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-013, 0.300" Wide 20-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide
Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Logic Diagram
Connection ...
Similar Datasheet