Temperature sensor
Datablad
Data sheet
Temperature sensor NTC 100 K for solar heating controller SH-E01
Temperature sensor NTC 100 K for...
Description
Datablad
Data sheet
Temperature sensor NTC 100 K for solar heating controller SH-E01
Temperature sensor NTC 100 K for solar heating controller SH-E01
General
Ordering Technical data
Resistance value, NTC 100K
Solar heating controller type SH-E01 uses the differential temperature between two temperature sensors to control the transfer of heat energy from a Solar collector to a hot water storage tank.
These temperature sensors are thermally sensitive semiconductor resistors which show a decrease in resistance as temperature increases. In this application the sensors are used in accordance with their zero-power characteristics.
Sensor units consist of an NTC (negative temperature coefficient) 100 K resistance element which is then encapsulated in a sealed Copper tube.
The sensor is adjusted to meet the tolerance requirements of BS EN 60751.
Type NTC 100K temperature sensor
Spare parts and accessories Type Sensor pocket, brass Sensor pocket, brass Heat conduction compound Heat conduction compound
Temperature range Cable length
–40 to 200°C
3m
Ordering no. 088H2050
Description Length 112 mm Length 182 mm
5g 0.9 kg
Ordering no. 993N3568 993N3569 041E0110 041E0111
Sensor enclosure: Rating: Body: Diameter: Length:
IP 68 (totally sealed) C105 Copper tube 8 mm 50 mm
Cable: 0.5 m of B-type PTFE wire 16/0.2 to BS 3G 210 with maximum temperature ratings of –75 to 260°C. This is enclosed in Vidaflex S100, Class H (180°C) sleeving rated for short term temperatures up to 250°C...
Similar Datasheet