PYRO-ELECTRIC IR-DETECTOR
DEVICE SPECIFICATION FOR
PYRO-ELECTRIC IR-DETECTOR
Customer :
Type
: PYS 3228 TC G7.4/G20
Part no.
: 3830
No. of s...
Description
DEVICE SPECIFICATION FOR
PYRO-ELECTRIC IR-DETECTOR
Customer :
Type
: PYS 3228 TC G7.4/G20
Part no.
: 3830
No. of samples:
Thermally compensated two channel single element detector with lithium-tantalate crystal as sensing element, FET in source follower configuration.
This specification is provided by PerkinElmer Technologies GmbH & Co. KG, Wiesbaden.
It covers the complete technical data of a pyro-electric IR detector. All detectors have met the requirements of PerkinElmer test-specifications and passed outgoing inspection.
We kindly ask for approval with the return of a signed copy.
Checked:
Date: 09.11.10
Customer approval:
Detector type : PYS 3228 TC G7.4/G20 Date of Issue: 13.01.09
Part no.: 3830 Date of Rev.:
Date:
Page: 1 Of :6
Electrical Configuration: Two single sensing elements and two compensating elements are connected to built-in FET in source follower circuit, connections "Drain-Source-Ground". It is recommended to use a load resistor of 47 kΩ.
Electrical data: Unless specified differently, all data refer to 25°C and VDD= 11 V:
Responsivity:
min.: 2.2 kV/W
typ.: 3.5 kV/W
Responsivity is measured within spectral range 7 - 14 µm as per fig. 3 at 1Hz. Temperature coefficient of responsivity typ.: -0.1 %/K.
Noise:
max.: 50 µVpp
typ.: 15 µVpp
After a 10 minute settling time, noise is monitored for the duration of 1500 sec. at a
temperature of 25°C, shut from infrared energy, electrical bandwidth of 0.4 to 10Hz.
Operating voltage:
VDD= 2-12 ...
Similar Datasheet