LPC812M101JTB16

LPC81xM 32-bit ARM® Cortex®-M0+ microcontroller; up to 16 kB flash and 4 kB SRAM Rev. 4.7 — 19 March 2021 Product data sheet 1. General description The LPC81xM are an ARM Cortex-M0+ based, low-cost 32-bit MCU family operating at CPU frequencies of up to 30 MHz. The LPC81xM support up to 16 kB of flash memory and 4 kB of SRAM. The peripheral complement of the LPC81xM includes a CRC engine, one I2C-bus interface, up to three USARTs, up to two SPI interfaces, one multi-rate timer, self wake-up timer, and state-configurable timer, one comparator, function-configurable I/O ports through a switch matrix, an input pattern match engine, and up to 18 general-purpose I/O pins. 2. Features and benefits  System:  ARM Cortex-M0+ processor, running at frequencies of up to 30 MHz with single-cycle multiplier and fast single-cycle I/O port.  ARM Cortex-M0+ built-in Nested Vectored Interrupt Controller (NVIC).  System tick timer.  Serial Wire Debug (SWD) and JTAG boundary scan modes supported.  Micro Trace Buffer (MTB) supported.  Memory:  Up to 16 kB on-chip flash programming memory with 64 Byte page write and erase.  Up to 4 kB SRAM.  ROM API support:  Boot loader.  USART drivers.  I2C drivers.  Power profiles.  Flash In-Application Programming (IAP) and In-System Programming (ISP).  Digital peripherals:  High-speed GPIO interface connected to the ARM Cortex-M0+ IO bus with up to 18 General-Purpose I/O (GPIO) pins with configurable pull-up/pull-down resistors, programma...