32b MCU+FPU. STM32F302ZE Datasheet

STM32F302ZE MCU+FPU. Datasheet pdf. Equivalent

Part STM32F302ZE
Description ARM Cortex-M4 32b MCU+FPU
Feature STM32F302xD STM32F302xE ARM® Cortex®-M4 32b MCU+FPU, up to 512KB Flash, 64KB SRAM, FMC, 2 ADCs, 1 D.
Manufacture STMicroelectronics
Download STM32F302ZE Datasheet

STM32F302xD STM32F302xE ARM® Cortex®-M4 32b MCU+FPU, up to STM32F302ZE Datasheet
Recommendation Recommendation Datasheet STM32F302ZE Datasheet

STM32F302xD STM32F302xE
ARM® Cortex®-M4 32b MCU+FPU, up to 512KB Flash, 64KB SRAM,
FSMC, 2 ADCs, 1 DAC ch., 4 comp, 2 Op-Amp, 2.0-3.6 V
Datasheet - production data
Core: ARM® Cortex®-M4 32-bit CPU with
72 MHz FPU, single-cycle multiplication and
HW division, DSP instruction and MPU
(memory protection unit)
Operating conditions:
– VDD, VDDA voltage range: 2.0 V to 3.6 V
– Up to 512 Kbytes of Flash memory
– 64 Kbytes of SRAM, with HW parity check
implemented on the first 32 Kbytes.
– Flexible memory controller (FSMC) for
static memories, with four Chip Select
CRC calculation unit
Reset and supply management
– Power-on/Power-down reset (POR/PDR)
– Programmable voltage detector (PVD)
– Low-power modes: Sleep, Stop and
– VBAT supply for RTC and backup registers
Clock management
– 4 to 32 MHz crystal oscillator
– 32 kHz oscillator for RTC with calibration
– Internal 8 MHz RC with x 16 PLL option
Internal 40 kHz oscillator
Up to 115 fast I/Os
– All mappable on external interrupt vectors
– Several 5 V-tolerant
Interconnect matrix
12-channel DMA controller
Two ADCs 0.20 µs (up to 18 channels) with
selectable resolution of 12/10/8/6 bits, 0 to
3.6 V conversion range, separate analog
supply from 2.0 to 3.6 V
One 12-bit DAC channels with analog supply
from 2.4 to 3.6 V
(10 × 10 mm)
(14 × 14 mm)
(20 x 20 mm)
(7 x 7 mm)
(4.775 x 5.041 mm)
Four ultra-fast rail-to-rail analog comparators
with analog supply from 2.0 to 3.6 V
Two operational amplifiers that can be used in
PGA mode, all terminals accessible with
analog supply from 2.4 to 3.6 V
Up to 24 capacitive sensing channels supporting
touchkey, linear and rotary touch sensors
Up to 11 timers:
– One 32-bit timer and two 16-bit timers with
up to four IC/OC/PWM or pulse counter
and quadrature (incremental) encoder input
– One 16-bit 6-channel advanced-control
timers, with up to six PWM channels,
deadtime generation and emergency stop
– One 16-bit timer with two IC/OCs, one
OCN/PWM, deadtime generation and
emergency stop
– Two 16-bit timers with IC/OC/OCN/PWM,
deadtime generation and emergency stop
– Two watchdog timers (independent,
– One SysTick timer: 24-bit downcounter
– One 16-bit basic timers to drive the DAC
Calendar RTC with Alarm, periodic wakeup
from Stop/Standby
Communication interfaces
– CAN interface (2.0B Active)
October 2016
This is information on a product in full production.
DocID026900 Rev 4

STM32F302xD STM32F302xE
– Three I2C Fast mode plus (1 Mbit/s) with
– USB 2.0 full-speed interface with LPM
20 mA current sink, SMBus/PMBus,
wakeup from STOP
Infrared transmitter
– Up to five USART/UARTs (ISO 7816
interface, LIN, IrDA, modem control)
– Up to four SPIs, 4 to 16 programmable bit
SWD, Cortex®-M4 with FPU ETM, JTAG
96-bit unique ID
frames, two with multiplexed half/full duplex
I2S interface
Table 1. Device summary
Part number
STM32F302xD STM32F302RD, STM32F302VD, STM32F302ZD.
STM32F302xE STM32F302RE, STM32F302VE, STM32F302ZE.
DocID026900 Rev 4

@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)