LTM4649

LTM4649 10A Step-Down DC/DC µModule Regulator FEATURES nn 10A DC Output Current nn Input Voltage Range: 4.5V to 16V nn Output Voltage Range: 0.6V Up to 3.3V nn No Heat Sink or Current Derating Up to 85°C Ambi- ent Temperature nn ±1.5% Total DC Voltage Output Error nn Multiphase Operation with Current Sharing nn Remote Sense Amplifier nn Built-In General Purpose Temperature Monitor nn Selectable Pulse-Skipping Mode/Burst Mode® Opera- tion for High Efficiency at Light Load nn Soft-Start/Voltage Tracking nn Protection: Output Overvoltage and Overcurrent Foldback nn 9mm × 15mm × 4.92mm BGA Package APPLICATIONS nn Telecom, Networking and Industrial Equipment nn Point of Load Regulation DESCRIPTION The LTM®4649 is a complete 10A high efficiency switching mode step-down DC/DC µModule® regulator in a 9mm × 15mm × 4.92 BGA package. Included in the package are the switching controller, power FETs, inductor, and all support components. Operating over an input voltage range of 4.5V to 16V, the LTM4649 supports an output voltage range of 0.6V to 3.3V, set by a single external resistor. This high efficiency design delivers 10A continuous current. Only bulk input and output capacitors are needed. High switching frequency and a current mode architecture enable a very fast transient response to line and load changes without sacrificing stability. The device supports frequency synchronization, programmable multiphase operation, and output voltage tracking for supply rail sequencing. Fault pr...