SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
SMA5.0 THRU SMA170CA
Stand-off Voltage Peak Pulse Power
5.0 to 170 Volts 3...
Description
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
SMA5.0 THRU SMA170CA
Stand-off Voltage Peak Pulse Power
5.0 to 170 Volts 300 Watts
FEATURES
For surface mounted applications in order to optimize board space
Low profile package Built-in strain relief Glass passivated junction Low inductance Excellent clamping capability Repetition Rate (duty cycle): 0.01% Fast response time: typical less than 1.0ps
from 0 volts to BV for unidirectional types Typical ID less than 1μA above 10V High temperature soldering:
250℃/W seconds at terminals Plastic package has Underwriters
Laboratory Flammability Classification 94V-O
DO-214AC(SMA) Dimensions in inches and (millimeters)
MECHANICAL DATA
Cass: JEDEC DO-214 AC, low profile molded plastic Terminals: Solder plated, solderable per MIL-STD-750,
Method 2026 Polarity: Indicated by cathode band except bi-directional types Weight: 0.002 ounces, 0.064 gram Standard Packaging: 12mm tape per (EIA-481)
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified
Peak Pulse Power Dissipation at TA=25℃(NOTE1,2,5)Fig.1 Peak Forward Surge Current per Figure 5 (NOTE 3) Peak Pulse Current on 10/10000μs wave from (NOTE1,FIG.2) Steady Stage Power Dissipation (Note 4) Operating Junction and Storage Temperature Range
Symbols
PPPM IFSM IPPM PM(AV) TJ, TSTG
Value
Minimum 400 40.0
See Table 1 1.0
50 to + 150
Notes:
1. Non-repetitive current pulse, per Fog.3 and derated above TA=2...
Similar Datasheet