DatasheetsPDF.com

SMA120A Dataheets PDF



Part Number SMA120A
Manufacturers MIC
Logo MIC
Description SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
Datasheet SMA120A DatasheetSMA120A Datasheet (PDF)

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMA5.0 THRU SMA170CA Stand-off Voltage Peak Pulse Power 5.0 to 170 Volts 300 Watts FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition Rate (duty cycle): 0.01% • Fast response time: typical less than 1.0ps from 0 volts to BV for unidirectional types • Typical ID less than 1μA above 10V • Hi.

  SMA120A   SMA120A



Document
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMA5.0 THRU SMA170CA Stand-off Voltage Peak Pulse Power 5.0 to 170 Volts 300 Watts FEATURES • For surface mounted applications in order to optimize board space • Low profile package • Built-in strain relief • Glass passivated junction • Low inductance • Excellent clamping capability • Repetition Rate (duty cycle): 0.01% • Fast response time: typical less than 1.0ps from 0 volts to BV for unidirectional types • Typical ID less than 1μA above 10V • High temperature soldering: 250℃/W seconds at terminals • Plastic package has Underwriters Laboratory Flammability Classification 94V-O DO-214AC(SMA) Dimensions in inches and (millimeters) MECHANICAL DATA • Cass: JEDEC DO-214 AC, low profile molded plastic • Terminals: Solder plated, solderable per MIL-STD-750, Method 2026 • Polarity: Indicated by cathode band except bi-directional types • Weight: 0.002 ounces, 0.064 gram • Standard Packaging: 12mm tape per (EIA-481) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS • Ratings at 25℃ ambient temperature unless otherwise specified Peak Pulse Power Dissipation at TA=25℃(NOTE1,2,5)Fig.1 Peak Forward Surge Current per Figure 5 (NOTE 3) Peak Pulse Current on 10/10000μs wave from (NOTE1,FIG.2) Steady Stage Power Dissipation (Note 4) Operating Junction and Storage Temperature Range Symbols PPPM IFSM IPPM PM(AV) TJ, TSTG Value Minimum 400 40.0 See Table 1 1.0 50 to + 150 Notes: 1. Non-repetitive current pulse, per Fog.3 and derated above TA=25℃ per Fig.2 2. mounted on 5.0mm2 copper pads to each terminal. 3. 8.3ms single half sine-wave duty cycle = 4 pulses per minutes maximum. 4. Lead temperature at 75℃ = TL. 5. Peak pulse power waveform is 10/1000μS. Unit Watts Amps Amps Watts ℃ Web Site: www.hkmic.com SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR SMA5.0 THRU SMA170CA Electrical Characteristic (TA =25℃ unless otherwise noted) Device Breakdown Voltage Marking Code V(BR) (Volts) at Test Current IT Device (Note 4) (Note 1&2) Type UNI BI MIN MAX IT(mA) Working Peak Reverse Voltage VWM (Volts) Stand-off Voltage Peak Pulse Power 5.0 to 170 Volts 300 Watts Maximum Reverse Leakage at VWM ID (μA) (Note 3) Maximum Peak Pulse Surge Current IPPM* (Amps) Maximum Clamping Voltage at IPPM* VC (Volts) SMA5.0 5V0 5V0C 6.4 7.81 10 5.0 800 31.3 9.6 SMA5.0A 5V0A 5V0CA 6.4 7.08 10 5.0 800 32.6 9.2 SMA6.0 6V0 6V0C 6.67 8.15 10 6.0 800 26.3 11.4 SMA6.0A 6V0A 6V0CA 6.67 7.37 10 6.0 800 29.1 10.3 SMA6.5 6V5 6V0C 7.22 8.82 10 6.5 500 24.4 12.3 SMA6.5A 6V5A 6V0CA 7.22 7.98 10 6.5 500 26.8 11.2 SMA7.0 7V0 7V0C 7.78 9.51 10 7.0 200 22.6 3.3 SMA7.0A 7V0A 7V0CA 7.78 8.6 10 7.0 200 25 12 SMA7.5 7V5 7V0C 8.33 10.3 1 7.5 100 21 14.3 SMA7.5A 7V5A 7V0CA 8.33 9.21 1 7.5 100 23.3 12.9 SMA8.0 8V0 8V0C 8.89 10.9 1 8.0 50 20 15 SMA8.0A 8V0A 8V0CA 8.89 9.83 1 8.0 50 22.1 13.6 SMA8.5 8V5 8V0C 9.44 11.5 1 8.5 10 18.9 15.9 SMA8.5A 8V5A 8V0CA 9.44 10.4 1 8..


SMA120 SMA120A SMA130


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)