Air Cylinder. MB1W Datasheet

MB1W Cylinder. Datasheet pdf. Equivalent


SMC MB1W
CAT.E272-
Single rod type
Series MB1
Double rod type
Series MB1W
Non-rotating rod type
Series MB1K
Square Tube Type
Air Cylinder
Series MB1
ø32, ø40, ø50, ø63, ø80, ø100
Employs a square tube with enclosed tie-rods


MB1W Datasheet
Recommendation MB1W Datasheet
Part MB1W
Description Square Tube Type Air Cylinder
Feature MB1W; CAT.E272- Single rod type Series MB1 Double rod type Series MB1W Non-rotating rod type Series MB1.
Manufacture SMC
Datasheet
Download MB1W Datasheet




SMC MB1W
Series MB1
Double Acting Single Rod Type
MB1W
Double Acting Double Rod Type
Improved cushion capacity
Piston rod lurching, due to cracking pressure at
start up, has been eliminated by means of a floating
seal mechanism.
Increased kinetic
energy absorption
The absorption of kintectic energy has
been increased by nearly 30%
compared to the CA1 series, through
increased cushion volume and the
use of a new cushion seal. In addition,
the life of the cushion seal is
approximately 5 times longer.
Compact and light weight
The height and width of the covers has been
reduced by nearly 10%, and in an addition, die
casting of the covers has reduced the weight by
10 to 25% compared to the CA1 series.
Improved mounting accuracy
High precision has been achieved in the cylinder unit and the
mounting brackets. Improved mounting accuracy simplifies the
mounting process and also extends cylinder life.
Piston rod sagging reduced
Sagging of the piston rod has been reduced by
increasing the precision of the bushing and piston rod,
and reducing their clearances.
Feature 1



SMC MB1W
MB1K
Double Acting Non-Rotating Rod
ø32, ø40, ø50, ø63, ø80, ø100
Space saving auto switch mounting
Space is saved by setting switches into grooves provided on 4
surfaces. This is also effective to prevent loosening and
damage, etc.
Port aperture
Easy cushion valve adjustment
Since adjustment of the cushion valve is performed with a
hexagon wrench key, even fine control can be easily
accomplished. Furthermore, the cushion valve has been
recessed so that it does not protrude from the cover.
Appearance improved
by enclosing the tie-rods
Tie-rods are enclosed in a rectangular tube,
which is integrated with both covers to achieve
an attractive, unified appearance.
A full range of order made specifications
Dust accumulation can be
prevented with fastener strips
Auto switch mounting grooves can be covered with resin
fastener strips, which adhere tightly to the tube (optional) to
prevent the entry and accumulation of dirt.
No. Symbol
1 -XA0 to XA30
2 -XB5
3 -XB6
4 -XB13
5 -XC3
6 -XC4
7 -XC5
8 -XC6
9 -XC7
10 -XC8
11 -XC9
12 -XC10
13 -XC11
14 -XC12
15 -XC18
16 -XC22
17 -XC30
18 -XC35
19 -X846
Specification/Content
Modification of rod end shape
Heavy duty rod
Heat resistant cylinder (to 150°C)
Low speed cylinder
Special port locations
With heavy duty scraper
Heat resistant cylinder (to 110°C)
Stainless steel piston rod and rod end nut
Stainless steel tie-rods, tie-rod nuts, cushion valve, etc.
Adjustable stroke cylinder (adjustable extension type)
Adjustable stroke cylinder (adjustable retraction type)
Dual stroke cylinder (double rod type)
Dual stroke cylinder (single rod type)
Tandem type cylinder
NPT ports
Fluoro rubber seals
Front trunnion mounted on front of rod cover
With coil scraper
Fastener strips mounted on switch mounting grooves
Series variations
JIS symbol
Single rod type
Series MB1
Bore
size
32
Standard stroke (mm)
50 100 150 200 300 400 500
25 75 125 175 250 350 450 600
••••••••••••••
Built-inRmodagbnoeott
Mounting brackets
Accessories
Basic type
(Standard)
Axial foot type
Front flange type
Rod end nut
(Optional)
Knuckle joint pin
• • Rear flange type
Clevis pin
Single clevis type
Double clevis type
Single knuckle joint
Double knuckle joint
Trunnion mounting bracket
Center trunnion type Double clevis mounting plate
Page 1
JIS symbol
Double rod type
Series MB1W
JIS symbol
Non-Rotating Rod
Series MB1K
40 • • • • • • • • • • • • • •
50 • • • • • • • • • • • • • • •
63 • • • • • • • • • • • • • • •
Basic type
(Standard)
Rod end nut
Foot type
Flange type
(Optional)
Knuckle joint pin
Single knuckle joint
Center trunnion type
Double knuckle joint
Trunnion mounting bracket
Page 13
Basic type
(Standard)
Axial foot type
Front flange type
• • Rear flange type
Rod end nut
(Optional)
Knuckle joint pin
Clevis pin
Page 18
Single clevis type
Double clevis type
Single knuckle joint
Double knuckle joint
Trunnion mounting bracket
Center trunnion type Double clevis mounting bracket
Feature 2







@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)