MB1

CAT.E272- Single rod type Series MB1 Double rod type Series MB1W Non-rotating rod type Series MB1K Square Tube Type Air Cylinder Series MB1 ø32, ø40, ø50, ø63, ø80, ø100 Employs a square tube with enclosed tie-rods Series MB1 Double Acting Single Rod Type MB1W Double Acting Double Rod Type Improved cushion capacity Piston rod lurching, due to cracking pressure at start up, has been eliminated by means of a floating seal mechanism. Increased kinetic energy absorption The absorption of kintectic energy has been increased by nearly 30% compared to the CA1 series, through increased cushion volume and the use of a new cushion seal. In addition, the life of the cushion seal is approximately 5 times longer. Compact and light weight The height and width of the covers has been reduced by nearly 10%, and in an addition, die casting of the covers has reduced the weight by 10 to 25% compared to the CA1 series. Improved mounting accuracy High precision has been achieved in the cylinder unit and the mounting brackets. Improved mounting accuracy simplifies the mounting process and also extends cylinder life. Piston rod sagging reduced Sagging of the piston rod has been reduced by increasing the precision of the bushing and piston rod, and reducing their clearances. Feature 1 MB1K Double Acting Non-Rotating Rod ø32, ø40, ø50, ø63, ø80, ø100 Space saving auto switch mounting Space is saved by setting switches into grooves provided on 4 surfaces. This is also effective to prevent...