OKX-T-3-W5-C Converters Datasheet

OKX-T-3-W5-C Datasheet, PDF, Equivalent


Part Number

OKX-T-3-W5-C

Description

Adjustable 3-Amp SIP Non-Isolated DC/DC Converters

Manufacture

Murata

Total Page 15 Pages
Datasheet
Download OKX-T-3-W5-C Datasheet


OKX-T-3-W5-C
www.murata-ps.com
OKX T/3-W5 Series
Adjustable 3-Amp SIP Non-Isolated DC/DC Converters
FEATURES
„Non-isolated SIP PoL DC/DC power module
„2.4-5.5Vdc input voltage range
„Programmable output voltage from 0.7525-
3.366Vdc
„Under Voltage shutdown (Vin)
„Drives 1000 μF ceramic capacitive loads
„High power conversion efficiency 94.5% at 3.3
Vout (typical)
„Outstanding thermal derating performance
„Over temperature and over current protection
„On/Off control
„UL60950, CSA-C22.2 No.60950 IEC/EN60950
(pending)
„Industry-standard (DOSA) SIP format
„RoHS-6 hazardous substance compliance
Typical unit
PRODUCT OVERVIEW
The OKX-T/3-W5 series are miniature SIP non-
isolated Point-of-Load (PoL) DC/DC power convert-
ers for embedded applications. The module is fully
compatible with Distributed-power Open Standards
Alliance industry-standard specifications.
Applications include powering CPU’s, datacom/
telecom systems, programmable logic and mixed
voltage systems. The wide input range is 2.4 to 5.5
Volts DC at 3 amps. Based on fixed-frequency syn-
chronous buck converter switching topology, the
high power conversion efficient Point of Load (PoL)
module features programmable output voltage
and On/Off control. These converters also include
under voltage lock out (UVLO), output short circuit
protection, over-current and over temperature
protections. These units are designed to meet all
standard UL/EN/IEC 60950-1 safety certifications
and RoHS-6 hazardous substance compliance.
+Vin
F1
On/Off
Control
External
DC
Power
Source
Open = On
Closed = Off
(Positive
On/Off)
Common
Connection Diagram
Controller
t4XJUDIJOH
t'JMUFST
t$VSSFOU4FOTF
Reference and
Error Amplifier
Figure 1. OKX-T/3-W5
Note: Murata Power Solutions strongly recommends an external input fuse, F1.
See specifications.
+Vout
Trim
Common
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
(pending)
MDC_OKX_T/3-W5 Series.A01 Page 1 of 15

OKX-T-3-W5-C
OKX T/3-W5 Series
Adjustable 3-Amp SIP Non-Isolated DC/DC Converters
PERFORMANCE SPECIFICATIONS SUMMARY AND ORDERING GUIDE
Output
Input
Model Number
VOUT
(Volts)
IOUT R/N Regulation (Max.)
(Amps, Power (mVp-p)
Vin Nom. Range
max) (Watts) Max. d Line Load (Volts) (Volts) e
Iin,
no load
(mA)
OKX-T/3-W5-C .7525-3.6 3
9.9 40 ±0.2% ±0.5% 5 2.4-5.5 40
Iin,
full load
(Amps)
Efficiency
Min. Typ.
2.095 92.5% 94.5%
All specifications are typical at nominal line voltage, Vout=nominal (3.3V for W5 models) and full load, +25°C.
d Ripple and Noise (R/N) is shown at Vout=1V. See specs for details.
e The input voltage range must be 0.5V greater than the output voltage.
Dimensions
in inches (mm)
0.40x0.90x0.282
(10.16x 22.86x 7.163)
PART NUMBER STRUCTURE
OK X - T / 3 - W5 N - C
Okami Non-isolated PoL
RoHS Hazardous Substance Compliance
C = RoHS-6 (does not claim EU RoHS
exemption 7b–lead in solder)
SIP Mount
Trimmable Output
Voltage Range
W5 Models = 0.7525-3.63V
On/Off Logic
P = Positive Logic
N = Negative Logic
Maximum Rated Output
Current in Amps
Input Voltage Range
W5 = 2.4-5.5V
Note: Some model number combinations
may not be available. See Ordering Guide
above. Contact Murata Power Solutions for
availability.
www.murata-ps.com/support
MDC_OKX_T/3-W5 Series.A01 Page 2 of 15


Features www.murata-ps.com OKX T/3-W5 Series Adj ustable 3-Amp SIP Non-Isolated DC/DC Co nverters FEATURES „Non-isolated SIP PoL DC/DC power module „2.4-5.5Vdc in put voltage range „Programmable outpu t voltage from 0.7525- 3.366Vdc „Unde r Voltage shutdown (Vin) „Drives 1000 μF ceramic capacitive loads „High p ower conversion efficiency 94.5% at 3. 3 Vout (typical) „Outstanding thermal derating performance „Over temperatu re and over current protection „On/Of f control „UL60950, CSA-C22.2 No.6095 0 IEC/EN60950 (pending) „Industry-sta ndard (DOSA) SIP format „RoHS-6 hazar dous substance compliance Typical unit PRODUCT OVERVIEW The OKX-T/3-W5 serie s are miniature SIP nonisolated Point-o f-Load (PoL) DC/DC power converters for embedded applications. The module is f ully compatible with Distributed-power Open Standards Alliance industry-standa rd specifications. Applications includ e powering CPU’s, datacom/ telecom sy stems, programmable logic and mixed voltage systems. The wide input range is 2.4 t.
Keywords OKX-T-3-W5-C, datasheet, pdf, Murata, Adjustable, 3-Amp, SIP, Non-Isolated, DC/DC, Converters, KX-T-3-W5-C, X-T-3-W5-C, -T-3-W5-C, OKX-T-3-W5-, OKX-T-3-W5, OKX-T-3-W, Equivalent, stock, pinout, distributor, price, schematic, inventory, databook, Electronic, Components, Parameters, parts, cross reference, chip, Semiconductor, circuit, Electric, manual, substitute




@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)