Embedded MPU. SAM9260 Datasheet

SAM9260 MPU. Datasheet pdf. Equivalent


ATMEL SAM9260
SAM9260
Atmel | SMART ARM-based Embedded MPU
DATASHEET
Description
The Atmel® | SMART SAM9260 eMPU is based on the integration of an
ARM926EJ-S™ processor with fast ROM and RAM memories and a wide range
of peripherals.
The SAM9260 embeds an Ethernet MAC, one USB Device Port, and a USB Host
controller. It also integrates several standard peripherals, such as the USART,
SPI, TWI, Timer Counters, Synchronous Serial Controller, ADC and MultiMedia
Card Interface.
The SAM9260 is architectured on a 6-layer matrix, allowing a maximum internal
bandwidth of six 32-bit buses. It also features an External Bus Interface capable
of interfacing with a wide range of memory devices.
Atmel-6221M-ATARM-SAM9260-Datasheet_13-Jan-16


SAM9260 Datasheet
Recommendation SAM9260 Datasheet
Part SAM9260
Description SMART ARM-based Embedded MPU
Feature SAM9260; AT91SAM ARM-based Embedded MPU SAM9260 Features • 180 MHz ARM926EJ-S™ ARM® Thumb® Processor – 8 KByt.
Manufacture ATMEL
Datasheet
Download SAM9260 Datasheet




ATMEL SAM9260
Features
180 MHz ARM926EJ-S™ ARM® Thumb® Processor
̶ 8 Kbytes Data Cache, 8 Kbytes Instruction Cache, MMU
Memories
̶ 32-bit External Bus Interface supporting 4-bank SDRAM/LPSDR, Static Memories, CompactFlash, SLC NAND
Flash with ECC
̶ Two 4-Kbyte internal SRAM, single-cycle access at system speed
̶ One 32-Kbyte internal ROM, embedding bootstrap routine
Peripherals
̶ ITU-R BT. 601/656 Image Sensor Interface (ISI)
̶ USB Device and USB Host with dedicated On-Chip Transceiver
̶ 10/100 Mbps Ethernet MAC Controller (EMAC)
̶ One High Speed Memory Card Host
̶ Two Master/Slave Serial Peripheral Interfaces (SPI)
̶ Two 3-channel 32-bit Timer/Counters (TC)
̶ One Synchronous Serial Controller (SSC)
̶ One Two-wire Interface (TWI)
̶ Four USARTs
̶ Two UARTs
̶ 4-channel 10-bit ADC
System
̶ 90 MHz six 32-bit layer AHB Bus Matrix
̶ 22 Peripheral DMA Channels
̶ Boot from NAND Flash, DataFlash or serial DataFlash
̶ Reset Controller (RSTC) with On-Chip Power-on Reset
̶ Selectable 32.768 kHz Low-Power and 3–20 MHz Main Oscillator
̶ Internal Low-Power 32 kHz RC Oscillator
̶ One PLL for the system and one PLL optimized for USB
̶ Two Programmable External Clock Signals
̶ Advanced Interrupt Controller (AIC)
̶ Debug Unit (DBGU)
̶ Periodic Interval Timer (PIT)
̶ Watchdog Timer (WDT)
̶ Real-time Timer (RTT)
I/O
̶ Three 32-bit Parallel Input/Output Controllers
̶ 96 Programmable I/O Lines Multiplexed with up to Two Peripheral I/Os
Package
̶ 217-ball LFBGA – 15 x 15 x 1.4 mm, 0.8 mm pitch
̶ 208-pin PQFP – 28 x 28 x 4.1 mm, 0.5 mm pitch
2 SAM9260 [DATASHEET]
Atmel-6221M-ATARM-SAM9260-Datasheet_13-Jan-16



ATMEL SAM9260
1. SAM9260 Block Diagram
Figure 1-1, “SAM9260 Block Diagram,” on page 4 shows all the features for the 217-LFBGA package. Some
functions are not accessible in the 208-pin PQFP package and the unavailable pins are highlighted in “Multiplexing
on PIO Controller A” on page 29, “Multiplexing on PIO Controller B” on page 30, “Multiplexing on PIO Controller C”
on page 31. The USB Host Port B is not available in the 208-pin package. Table 1-1 defines all the multiplexed and
not multiplexed pins not available in the 208-PQFP package.
Table 1-1.
Unavailable Signals in 208-lead PQFP Package
PIO Peripheral A
– HDPB
– HDMB
PA30
SCK2
PA31
SCK0
PB12
TXD5
PB13
RXD5
PC2 AD2
PC3 AD3
PC12
IRQ0
Peripheral B
RXD4
TXD4
ISI_D10
ISI_D11
PCK1
SPI1_NPCS3
NCS7
SAM9260 [DATASHEET]
Atmel-6221M-ATARM-SAM9260-Datasheet_13-Jan-16
3





@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site (Privacy Policy & Contact)